Over on his YouTube channel Adam 9A4QV has uploaded a video that shows him receiving the NOAA 19 HRPT signal at 1698 MHz with his HackRF, LNA4ALL and the simple circularly polarized cooking pot antenna that we saw in his last videos.
HRPT stands for High Resolution Picture Transmission and is a digital protocol that is used on some satellites to transmit much higher resolution weather images when compared to the APT signal that most people are familiar with receiving. The HRPT signal is available on NOAA19, which also transmits APT. However, unlike APT which is at 137 MHz, HRPT is at 1698 MHz, and is typically a much weaker signal requiring a higher gain motorized tracking antenna.
However in the video Adam shows that a simple cooking pot antenna used indoors is enough to receive the signal (weakly). The signal is probably not strong enough to achieve a decoded image, but perhaps some tweaks might improve the result.
Over on his Reddit thread about the video Adam mentions that a 90cm dish, with a proper feed and two LNA4ALLs should be able to receive the HRPT signal easily. User devnulling also gives some very useful comments on how the software side could be set up if you were able to achieve a high enough SNR.
GNU Radio has HRPT blocks in the main tree (gr-noaa) that work well for decoding and then David Taylor has HRPT reader which will generate an image from the decode GR output. http://www.satsignal.eu/software/hrpt.htm
http://usa-satcom.com has a paid HRPT decoder that runs on windows that has some improvements for lower SNR locking and works very well.