Decoding and Listening to HD Radio (NRSC-5) with an RTL-SDR

HD Radio is a high definition terrestrial digital broadcast signal that is only used in North America. It is easily recognized by the two rectangular blocks on either side of a broadcast FM station signal on a spectrum analyzer/waterfall display. Since HD Radio uses a proprietary protocol, finding a way to decode it has been difficult and so this signal has been inaccessible to SDR users for a long time. Back in February of this year we posted about Phil Burrs attempt, where he was able to create a partial implementation (up to layer 2) of the HD Radio standard, but didn’t get far enough to decode any audio in layer 3.

However, now cyber security researcher ‘Theori’ has created a full RTL-SDR based decoder for the HD Radio protocol. In his post Theori explains that the HD Radio system is split into three layers. Layer 1 finds the signals and does decoding and error correction. Layer 2 is a multiplexing layer, which allows various layer 3 applications to share the bandwidth. Layer 3 is the audio data layer. In his post he explains how these layers work in detail. 

One of the main findings was the discovery of the audio compression codec. Theori found that the codec was essentially HE-AAC with some minor modifications. The modifications were minor enough that he was able to adapt the open source FAAD2 library for HD Radio audio decoding.

Theori’s code is open source and available on GitHub. The code includes the patch to modify FAAD2 for HD Radio and it is automatically applied during the build. A sample file for testing the decoder is also provided and we tested the decoder with the sample and it worked well. The decoding can also be performed in real time and examples of that are also on the git readme.