Tagged: AISMon

DragonOS: Setting up AISMon with WINE and Virtual Audio Sink for HackRF and RTL-SDR

Over on his YouTube channel Aaron, creator of the DragonOS image (a Linux image with many built-in SDR compatible programs) has uploaded a new video showing how it is possible to run the Windows only AISMon software on Linux, using WINE. WINE is a Windows emulator for Linux which allows users to run some Windows software on Linux.

In the video Aaron shows how to set up WINE on the DragonOS Linux image, how to run AISMon with it, and how to set up the Virtual Audio Cable sink which is required to pass the audio from SDR++ to AISMon. He also shows how he tests his setup using the AIS-Simulator software with a HackRF, and an RTL-SDR for receiving.

DragonOS FocalX Setup AISMon with WINE + Virtual Audio Sink (HackRF, RTLSDR, SDR++, AIS-Simulator)

Decoding 2x AIS Channels with SDR Console, AISMon and OpenCPN

YouTube user k2nccvids has posted a video showing him decoding and plotting both AIS channels simultaneously on a Windows PC with free software. To do this he uses SDR Console and two AISMon instances. SDR Console is a general purpose SDR GUI that supports the RTL-SDR. One of it’s major advantages over other SDR software is that it can tune to multiple signals in the same swath of tuned bandwidth simultaneously and output their audio to different virtual audio cables.

k2nccvids used two AISMon instances, each one connected to a separate virtual audio cable outputting AIS audio from SDR Console. He set AISMon to output decoded UDP packets on two different ports. Then he created two UDP listeners in OpenCPN for plotting, one for each port.

AIS Decoding Video Tutorial with OpenCPN, AISMon and RTL-SDR

YouTube user Drvarnick has posted a good video tutorial on getting AIS decoding set up with the RTL-SDR using the free OpenCPN, AISMon, SDRSharp and VBCable Windows software programs.

We also have an AIS decoding tutorial blog post posted earlier in the year that shows similar steps at this link.

RTL-SDR AIS Reception-Decoding

RTL-SDR Tutorial: Cheap AIS Ship Tracking

Large ships and passenger boats are required to broadcast an identification signal containing position, course, speed, destination, and vessel dimension information to help prevent sea collisions. This system is known as the "Automatic Identification System" or AIS for short. There are dedicated AIS receivers intended to be used on boats, or by hobbyists, but they can be expensive. A radio scanner, or the cheap RTL-SDR software defined radio (or a more advanced SDR such an Airspy) can be used to receive these signals, and with the help of decoding software, ship positions can be plotted on a map.

This tutorial will show you how to set up an AIS receiver with the RTL-SDR. Most parts of this tutorial are also applicable to other software radios, such as the Funcube dongle, Airspy and HackRF, or even regular hardware scanners if a discriminator tap is used, but the RTL-SDR is the cheapest option.

Safety Warning: This probably should not be used a navigational aid on a boat as the field reliability of the RTL-SDR or other software radios is not proven. This guide is intended for land based scanner hobbyists.

Note, tracking ships with AIS is very similar to tracking aircraft with ADS-B, which is another project that may interest you.

Examples of AIS received with RTL-SDR

An AIS radar example is shown by YouTube user Vinicius Lenci who uses an RTL-SDR, SDRSharp and ShipPlotter. This video also shows what a strong AIS signal sounds like.

Recebendo sinais (AIS) com RTL-SDR

Continue reading