Tagged: lattepanda

LimeSDR Transmitting on the LattePanda

Just last week we posted about how Marty Wittrock was able to get his LimeSDR receiving perfectly on his LattePanda mini Windows 10 PC with SDRAngel. Now Marty has uploaded a new video which shows the LimeSDR running on the LattePanda and SDRAngel again, but this time transmitting 40m LSB voice. At this stage Marty is well on his way to creating a fully portable LimeSDR based ham transceiver. He writes about his setup:

Setup: LattePanda Win10/64-bit, LCD, Capacitive Touchscreen, LimeSDR and SDRAngel Win32 with a transmit device loaded…Also using a USB 2.0 audio device to make the microphone and speaker audio connections…WORKS GREAT..!!

The LimeSDR is a RX and TX capable SDR with a frequency range of 100 kHz – 3.8 GHz, bandwidth of up to 61.44 MHz, 12-bit ADC and 2×2 RX/TX channels. Recently the LimeSDR team have been crowdfunding for their new ‘LimeSDR Mini’ which is a smaller and cheaper feature reduced version of the standard LimeSDR. While all the early bird $99 USD units have been sold out, they are still available at the $139 USD price. Currently the crowdfunding campaign has already reached it’s $100,000 USD target with 35 days left.

One important ‘feature reduction’ to note is that the LimeSDR Mini can only tune down to 10 MHz, so it may not be as useful as the full $289 USD LimeSDR for creating a SDR based ham transceiver like what Marty is doing.

LimeSDR, LattePanda, and SDRAngel Transmitting on 40m LSB Voice

LimeSDR and SDRAngel Running on a LattePanda

Thanks to Marty Wittrock for sharing with us his latest news about his experiences with the LimeSDR. Over on YouTube he’s uploaded a video showing that the LimeSDR can run perfectly on a ‘LattePanda‘ which is a full Win10 64-bit PC in a Raspberry Pi sized package. The one Marty uses costs about $209 with a fully activated Windows 10 licence and has 64G eMMC memory, a 1.44 GHz CPU and 4GB of RAM. The cheaper version with 2GB of RAM and 32GB eMMC memory only costs $119 USD. Of interest is that the LattePanda also comes with an Arduino co-processor for various GPIO projects, which could be useful for switching in and out various radio blocks like filters and LNAs.

In his video Marty shows that the SDRAngel software run the LimeSDR smoothly on the LattePanda, and he demonstrates receiving the 30M band. He writes:

Ladies and Gentlemen may I present to you: The LimeSDR operating on receive on the 30m Shortwave Band using SDRAngel running on a Windows 10, 64-bit, 4G (RAM) 64G (FLASH) operating at 1.8 GHz on a LattePanda – – THE SMALLEST WINDOWS 10 PC ON EARTH..! No kidding, this makes my MSI ‘hockey puck’ PC look monstrous…The LattePanda is about the same size as my LimeSDR and a VERY POWERFUL little PC, too…I’m INCREDIBLY impressed with this tiny PC…This Single Board Computer also has an integrated Arduino processor such that all the bandswitching and other functions required to make a Software Defined Transceiver will be very trivial to add-in…The ‘proof of concept’ is complete – – this shows that it CAN BE DONE to make the LimeSDR into a compact, wideband Software Defined Transceiver that can be run on a car battery if needed…Watch the video and see for yourself…CHEERS..!

LimeSDR With LattePanda Win10 64-bit

In a second newer video he demonstrates the system running on a 7″ LCD touchscreen. He writes:

Here’s a follow-up YouTube video I did when I laced-up the LattePanda to a 7″ LCD and the companion Capacitive Touchscreen for the LimeSDR. This thing is awesome and very compact – it’s amazing. I’m planning to take those same components and mount them into a walnut case that I’m getting made from furniture-grade wood from Amana. The case will be sloped and will have enough room to put the LattePanda, LimeSDR, USB 3.0 hub, and *maybe* the PA – but I have to think that the PA will be outboard along with the Bandpass Filter Card assembly, too. I am planning to make a preselector/receive preamplifier for the LimeSDR that will reside in the case, too. The LattePanda not only has the Intel CherryTrail processor there for Windows, but it also has an integrated Arduino processor on the board along with the Arduino development software and the GPIO on the LattePanda to drive the BPF, PA, T/R switching, and the receive preamplifier/preselector/filter. No kidding – when this is all done this thing is going to be unstoppable. SDRAngel is open source so adding the communications for band switching will not be hard to do between Edouiard’s source in Win32 and to the Arduino through DLL calls. I’m even giving some serious thought about how LimeSDR-Mini will be included as an alternative with an even smaller footprint for this.

LimeSDR and LattePanda Win10, 64-bit running SDRAngel with 7" LCD/Touchscreen

Looks like the LimeSDR is slowly starting to all come together as a fully usable system for ham radio thanks to the efforts of people like Marty. Remember that Lime are currently crowdfunding for their latest LimeSDR Mini product, which is a cheaper $139 version of their LimeSDR. Currently almost $85k of the required $100k has already been raised, with still 40 days to go.