A new HF upconverter designed for the RTL-SDR has gone up on ttrftech’s Japanese language blog (use Google Translate). The upconverter is called the ‘SC-HFCONV-100’ and comes with 100 MHz oscillator, SMA connectors, USB mini-B power.
Currently the upconverter is only available for sale on the Japanese Amazon store, but it is possible to still order it through the jzool-agent Japanese shopping service.
A few months ago we posted about a Chinese individual (BA5SBA) who had begun selling RTL-SDR dongle kits for receiving HF frequencies. Back then it wasn’t entirely clear what these kits were or where they came from. Now over on Reddit, poster SidJenkins has bought one of these kits and assembled it. He has uploaded images of the construction which can be found here and the Reddit discussion can be found here. The kit is essentially an RTL-SDR extension PCB board that aids in building a direct sampling RTL-SDR with good performance by including filters and impedance matching.
SidJenkins notes that the kit came with no instructions, so he used this thread in Chinese (use Google translate) to help put the kit together.
Over on YouTube user Alex swl has uploaded a video showing his reception of a Very Low Frequency (VLF) radio signal using a laptop running SDRSharp and a Chirio Mini Whip antenna connected directly to the laptop’s sound card input.
Every year on Alexanderson Day (this year on 29/06/2014) and some other days the Varberg VLF Radio Station in Sweden transmits a morse code message using a 1.9 km (1.2 mile) horizontal wire antenna at 17.2 kHz with callsign SAQ. Because the transmission frequency is so low, a standard PC soundcard can be used to directly receive the signal.
Alex swl was able to receive this signal in Italy.
Xastir is a Linux based program that is used for plotting Automatic Packet Reporting System (APRS) data on a map. APRS is is type of packet radio system used by ham radio for real time local area digital communications. It is often used for sending messages, plotting positions on a map or providing weather station data.
Over on his blog, KJ6VVZ’s has uploaded a post showing how he was able to get the RTL-SDR working with Xastir. He uses rtl_fm piped into MultimonNG for the APRS decoding and then sends the decoded APRS information to Xastir via a FIFO buffer.
In previous posts we have featured Marty KN0CK’s popular modified RTL-SDR dongles which have either a miniature built in high quality HF upconverter with amplifier and filter, or an amplified and filtered direct sampling modification applied to them. With these modified dongles you can receive the HF frequencies from 0.5 MHz to 54 MHz. These kits were previously available for sale on a webstore, however that store has since closed down.
Fortunately, Marty’s modified RTL-SDR dongles are still available at http://www.kn0ck.com/HF_SDR/. The HF upconverting dongle can be bought for $75 and the direct sampling dongle at $60. The store page also shows example videos of the performance you can expect.
The DX Patrol 100 kHz to 2 GHz SDR receiver appears to be a custom built RTL-SDR with upconverter built in. It is made by CT1FFU who is also known to be a good manufacturer of upconverters for the RTL-SDR. The DX Patrol SDR can be bought for 79 Euros at CT1FFU’s website. It’s features are as follows:
We aren’t sure how this compares to a standard RTL-SDR with conventional upconverter, or direct sampling mode and we also aren’t sure about the truthfulness to their very high dynamic range claims as the RTL-SDR is known to have dynamic range that isn’t what could be called very high (8 bits ~ 50 dB).
Over on YouTube user OfficialSWLchannel has uploaded a video review. OfficialSWLchannel gives a generally positive review of the hardware.
The SoftRock Lite II is a (now fairly old) soundcard based software defined radio kitset that is capable of receiving on the HF bands. Over on YouTube user w2aew has uploaded a video showing the entire kitset build process for the SoftRock Lite II SDR radio. He also goes over the circuit blocks explaining their function and how they work.
This is an excellent video if you are interested in learning more about the components and circuits used in some SDRs.
Over on YouTube user Theo Faber has uploaded a video showing his adjustable multiband HF preselector project for his RTL-SDR dongle. The preselector covers the entire HF band. Theo designed and built his own homemade upconverter for this project as well.
Preselectors on the RTL-SDR can vastly improve reception quality. Without preselection, noise and strong images of other nearby stations can cause strong interference.
My project ‘pre selector’ for wideband radios and in particular the popular tv-sticks than can be used for SDR reception. The sticks are very cheap and the software free available on the internet. SDR Sharp in this case, is operating stable under XP and W7. Sticks are sensitive, however the input level can only vary +- 20dB. The sticks are easely overloaded and will produce cross and intermediation. So you need in front of the stick / converter band pass or tunable filters. Hopefully this inspired you to build your own set of filters, to fully benefit from the perfect performing of this affordable SDR.
for more info contact me on: t.faber87__AT__upcmail.nl
kind regards and 73’s
