Over on YouTube we've found an interesting project by RingingResonance where he's created a simulated traditional radar scope using a real analog radar scope tube, and ADS-B data gathered from an RTL-SDR running dump1090 on a Raspberry Pi 3B.
The project uses a real radar scope tube which is controlled by SPI signals sent from the Raspberry Pi into a DAC, which is in turn connected to the analog radar scope. RingingResonance has uploaded the open source code to GitHub. He notes that the code currently pushes the Raspberry Pi 3 to it's limits, so the sweep speed is limited.
It was to be a US$149 FT8 receiver based on an open source RF chip design, capable of acquiring signals between 7 MHz and 70 MHz (technically 1 MHz to 100 MHz). Shipments were expected to begin in April 2023.
Unfortunately the Maverick team just released today that the project will be suspended indefinitely due to logistical issues. Backers of the project will receive a full refund.
The Maverick-603 project has been indefinitely suspended due to unforeseen logistical obstacles. No funds have yet been spent and all backers will receive full refunds. If you backed this project, your refund will be issued within the next week to the credit card you originally used. If your credit card is no longer valid, please contact Crowd Supply support before midnight UTC on Friday, April 28, 2023 to arrange your refund. If the Maverick-603 project is revived, we will post another update. Thank you for your support and patience.
The RFNM is an upcoming software defined radio that has some impressive high end specifications only seen in SDRs costing thousands, and at the same time the creator claims that it will be priced at a steal. While no pricing has been set, the creator noted in a Reddit post that pricing will be "closer to $500", bringing it's price similar to SDRs like the HackRF, bladeRF, LimeSDR, PlutoSDR.
The RFNM will have eight 12-bit ADCs on board, and provide up to 612 MHz of real time bandwidth for receiving. For transmitting it has two DACs, with up to 153 MHz of TX bandwidth. The tuning range will be from 10 MHz up to 7200 MHz. They note that their front end also has 13 preselection filters and six different LNAs and programmable attenuators.
Pushing 12-bit 612 MHz bandwidth of the device would be difficult, so to help with processing all that data, there will be an onboard VSPA DSP processor, as well as built in ARM CPU cores, and a 16 GFLOPS GPU. Connectivity will be either through USB 3.0, or Ethernet.
The main baseband chip on the SDR is the Layerscape® Access LA9310 chip sold by NXP which provides I/Q ADCs and DACs. Those signals are sent to the RFNM Daughterboard Interface, where they are upconverted to the frequency range of interest. This lets the end user choose a different daughterboard for different applications.
The Granita daughterboard has tuning capability from 600 MHz to 7200 MHz. To get frequencies down to 10 MHz the RFNM is making use of the RFFC2071A mixer. There will also be a cheaper 'lite' version that does not use a mixer, and hence only provides tuning from 600 MHz to 7200 MHz.
In addition, the website states that they are pursing a version of their board that will make use of the LimeSDR LMS7002 chip that will cover 10 MHz to 3500 MHz. They are also looking into boards that may break out more ADC lanes, an oscilloscope add-on, and breakout board.
You can join the RFNM email waiting list, and find more details about it at rfnm.io. At the time of this post they state that the waiting list is "53% full". As of right now the project appears to have nothing concrete to show off, but the lead creator Davide Cavion was behind the FPV Blue HD Video system, so he appears to have the experience to take this project forward.
A render of the RFNM software defined radio board.
Just yesterday we posted about Linus Tech Tips review of the Flipper Zero. In related recent news, Flipper Zero was also banned from Amazon for being a "card skimming device". While the Flipper Zero reading the public NFC data from credit cards, it doesn't seem like it could do much more than what an Android phone could do with an NFC credit card reader app. Anyone skimming credit cards would still require the CVV code and other address details in order to put through a transaction.
This comes along from a bad string of events that has hit the Flipper Zero team. A while back PayPal froze 1.3M of its cash, requiring them to retain lawyers to force PayPal to partially release the funds. US customs then proceeded to seize its US bound shipment for inspection, then to throw salt in the wound, after releasing the goods they were billed $70,000 in storage fees for the pleasure of requiring inspection.
There are also reports of eBay banning the sale of Flipper Zero devices citing 'hacking' devices not being allowed on their platform.
The Brazilian National Telecommunications Agency has also begun seizing imports of Flipper Zero devices.
Flipper Zero is an affordable handheld RF device for pentesters and hackers. It is not based on SDR technology, however it uses a CC1101 chip, a digitally controlled RX/TX radio that is capable of demodulating and modulating many common digital modulations such as OOK/ASK/FSK/GFSK/MSK at frequencies below 1 GHz.
The CC1101 chip has been around since 2007, and there are many similar devices making use of the chip. However, the Flipper Zero is specifically marketed as a pentesting and hacking device, and provides built in software for doing things like replay attacks.
Part of the problem with the bans may also be the huge popularity that the device has received. The device has become exceedingly popular on social media sites like TikTok where users often show it being used mischievously.
Flipper Zero remains available for sale on its website flipperzero.one, for US$169.
The Flipper Zero is an affordable handheld RF device for pentesters and hackers. It is not based on SDR technology, however it uses a CC1101 chip, a digitally controlled RX/TX radio that is capable of demodulating and modulating many common digital modulations such as OOK/ASK/FSK/GFSK/MSK at frequencies below 1 GHz.
What sets it apart from most of the other CC1101 devices is the high level of software support built into it, the enthusiastic community and of course the branding.
Back in August 2020 we initially posted about the Flipper Zero starting its crowdfunding campaign on Kickstarter. Since then, despite major business problems like PayPal freezing 1.3M of its cash, and US customs temporarily seizing its shipments, then passing a $70,000 bill on to them for storage fees, Flipper has gained huge popularity through social media video sites like TikTok, where people show off its capabilities, often in ways that could be considered mischievous.
Recently over on YouTube, Linus from the most popular technology YouTube channel Linus Tech Tips reviewed the Flipper Zero. In the video Linus discusses the legally and morality of the Flipper Zero, and discusses some use cases around RFID and NFC.
Over on our store we've just reduced the price of the remaining stock of our RSP1A metal enclosure upgrade set. The price reduction brings it down to US$29.95 including free shipping to most countries.
This is a premium aluminum metal upgrade enclosure for the SDRplay RSP1A. It helps block RF interference and protects the RSP inside the sturdy enclosure. This is most likely to be our last production of this enclosure at least for a long period of time.
The kit includes 1x black aluminum metal enclosure with two labelled side panels, 1x black semi-hardshell carry case, 1x thermal pad to keep the RSP1A cool and mechanically stable inside the enclosure, 1x accessory set including enclosure screws, GND lug bolt set and 3M anti-slip rubber feet.
Please note that the set does NOT include the RSP1A.
The sale will only be available while stocks last. There are less than 50 units available from our international platforms, and less than 130 available at Amazon USA. So get in quick before they are all sold!
During last years Radio Society of Great Britain (RSGB) 2022 convention, Brian Coleman (G4NNS) presented a talk about the UK Meteor Beacon Project. The idea behind the project is to use a transmit beacon and a network of user-run receivers to help detect and study meteors. The talk has recently been uploaded to YouTube.
Radio signals can reflect off the meteor and the ionized trail left behind when it enters the atmosphere. This trail is highly RF reflective, so it can allow distant radio stations to be briefly received.
In the talk Brian explains the meteor detection, and explains the project in more detail.
The UK meteor beacon project is a collaborative project between the amateur radio and radio astronomy communities to collect data on meteor events over the UK. Phase I has been to establish a transmit beacon and Phase II is to create a network of receivers to monitor the radio echoes from meteors and stream data over the internet to support the study of meteor events and their impact on the ionosphere. Another key objective is to make possible a range of accessible radio-related STEM projects building on the interest in space and astronomy.
RSGB 2022 Convention presentation - The UK Meteor Beacon Project
Recently we came across a new RTL-SDR app on the Google Play store called TXAdvance which appears to be designed for professional sound engineers working in TV/film/stage/music production industry. The app uses an RTL-SDR to display the RF spectrum, helping sound engineers manage the RF spectrum for all their wireless sound recording devices, ensuring there is no overlapping signals, interference or intermodulation from other transmitters that could corrupt audio.
