April 25, 2018

Creating a High Altitude Balloon Telemetry System with Raspberry Pi, RPiTX and RTL-SDR

Over on his blog ZR6AIC explains how he's created a full HAB (high altitude balloon) telemetry transmit and receive system using RPiTX and an RTL-SDR dongle running on a Raspberry Pi 3.

RPiTX is software that enables the Raspberry Pi to transmit any modulated signal over a wide range of frequencies using just a single GPIO pin. However, the transmission contains multiple harmonics and thus requires sufficient filtering in order to transmit legally within the 2M ham band. To solve this ZR6AIC uses a 2M Raspberry Pi Hat kit which he designed and created that contains two low pass filters as well at the option for an additional power amplifier.

The rest of ZR5AIC's post explains how his HAB telemetry system combines the Raspberry Pi 3, RPiTX 2M Hat, RTL-SDR, a GPS unit, battery, temperature sensor and optional camera into a full HAB transmitting system. He also explains the software and terminal commands that he uses which allows him to transmit via RPiTX a CW beacon and GPS and temperature sensor APRS telemetry data with the Direwolf software. Full instructions on setting up the alsa-loopback audio routing is also provided.

Tweet29

Vote

29 Shares

April 25, 2018

GUI for Controlling the R820T2 Filters and Registers

Recently a program called R820T2Tweak_Patched was released which is a GUI for GQRX that allows you to manually control not only the three RF gain settings on R820T2 RTL-SDRs, but also the four filter settings as well as the registers directly. The R820T2 is the most commonly found tuner chip on RTL-SDR dongles, and is generally considered the best for most applications.

The GUI could be useful for advanced users wanting to experiment with the various lower level R820T2 register settings, or for anyone that wants ultimate control over the filters in the RTL-SDR.

The software is based on the original R820Tweak which has the same features except the ability to control the registers directly.

R820Tweak_Patched GUI. Control Gain, Filters and Registers.

Vote

April 25, 2018

Thomas N1SPY Demonstrates Receiving SSTV Images from the ISS

Earlier in the month the International Space Station (ISS) was transmitting SSTV images down to the earth for anyone to receive an decode. The ISS does this several times a year to commemorate special space related events, such as the day Yuri Gagarin (first man in space) was launched.

In the video Thomas explains why the ISS does this, how to track the ISS, and then he demonstrates actually receiving and decoding the signal. Thomas uses an Airspy HF+ to receive the signal on 145.8 MHz, however an RTL-SDR could do the same job. For decoding he uses the MMSSTV software.

For new on when the ISS might transmit SSTV again, keep at eye on the ARISS Blog, and the ISS Ham Twitter page.

2018: Thomas N1SPY receives SSTV signals from the ISS

Watch this video on YouTube

Vote

April 23, 2018

Osmo-FL2K: A TX-Only SDR Hacked From Commodity $5 USB to VGA Adapters – Demos Available for Transmitting WBFM, GSM, UMTS, GPS

Osmocom are some of the people behind the original discovery and development of the RTL-SDR (in particular Steve M), and today it looks like they have done it again by releasing exciting news of a way to turn a commodity $5 USB to VGA adapter into a TX-only capable SDR. They call their discovery 'osmo-fl2k', as the magic chip that makes it all happen is a Fresco Logic FL2000.

Examples of compatible Osmo-FL2K USB to VGA Adapters.

The discovery is based on the fact that the VGA specific HYSYC/VSYNC synchronizations on the FL2000 chip can be disabled, allowing for a continuous stream of samples to be sent to the VGA digital to analog converter (DAC). The FL2000 also implements a cheaper method of streaming data compared to other devices which allows these to be $5 devices.

The supported hardware appears to be any USB to VGA adapter that uses the FL2000 chip. They note that these are often advertised as "USB 3.0 to VGA" adapters with a maximum resolution of 1920 x 1080 for USB 3.0 and 800 x 600 for USB 2.0. Over on Amazon the cheapest one we've found (note not yet confirmed to be compatible) that meets the Osmocom description appears to be going for $7.49 and is fulfilled by Amazon. We've seen prices of $5.11 on Aliexpress and $5.99 on eBay too. There appears to be no difference between the brands of these units, as the 'brands' are just private labelled from the same factory, as anyone can add a brand to a generic product.

Once sellers catch on to the fact that these devices are going to be popular we expect them to most likely start raising prices.

In terms of TX performance and functionality, osmo-fl2k should be better than RPiTX as it uses an actual DAC, instead of just PWMing a pin. It appears that the device can transmit on a fundamental frequency anywhere from HF up to about 157 MHz, and then signal harmonics can be used to extend the range all the way up to around 1.7 GHz or maybe even higher. Having harmonics does mean that like other cheap TX methods, the signal is not clean and so proper filtering would be required before any sort of higher power transmission would be legal.

The highest fundamental frequency available also appears to be related to the performance of your PC's USB 3.0 controller. The worst USB 3.0 controller that they tested maxed out at 115 MS/s, whereas the best was 157 MS/s (theoretical max should be 160 MS/s). A USB 2.0 controller only gets a maximum sample rate of 14 MS/s.

So far the team have released software examples for transmitting DVB-T, GSM, UMTS (3G) and GPS, and have mentioned that they have also successfully transmitted LTE and DAB too. There is also an example for transmitting WBFM audio with RDS via the pacat Linux command and sox. The image below shows the FL2K-SDR working as a GSM base station.

Osmo-FL2K being used as a GSM Basestation

If you're interested in more information, Osmocom have released the slides from a presentation that they made at a OsmoDevCon presentation on April 22. The video presentation is also expected to be released soon at media.ccc.de.

Tweet93

Reddit31

Vote1

125 Shares

April 23, 2018

Tysonpower Reviews our Triple Filter ADS-B LNA

Thank you to YouTuber 'Tysonpower' who is known for making various RF related videos as he has recently reviewed our Triple Filtered ADS-B LNA on his blog and on YouTube. Note that his video is in German, but it contains English subtitles. In the review he compares our LNA against a more expensive ADS-B LNA and found that it performs just as good, if not better in some cases.

Our ADS-B LNA uses a triple filter design, as well as a two stage LNA which aims to significantly cut out interference from out of band signals which could overload the LNA and/or SDR dongle. It also has a low noise figure and high output gain of 27dB which is great for reducing losses on long runs of coax cable. More information about our LNA on the release post, and it can be purchased from our store.

[EN subs] Top ADSB LNA für nur 25€ - RTL-SDR Blog LNA

Watch this video on YouTube

Vote

April 23, 2018

Part III of Calibrating your RTL-SDR with QIRX SDR Now Uploaded

Earlier in the month we posted about Clem's three part series on how his QIRX SDR software can be used to accurately calibrate an RTL-SDR using DAB signals. Back then only parts I and II had been released. Now part III has been released, and in the article he explains why it is beneficial to calibrate the frequency error, and also the sampling rate when attempting to decode DAB signals..

Clem begins by explaining how DAB signals work and why it is important to have accurate frequency calibration when receiving DAB. Later he goes on to explain the effect of sampling rate errors due to frequency inaccuracy on received DAB signals. He shows the effect of gradually increasing the sample rate error on the ability of the algorithms to decode DAB signals.

Comparing constellations with sampling rate error correction turned on and off.

Vote

April 20, 2018

OH2BNF’s Plan for a Large Scale Raspberry SDR (LSR-SDR) Based on RTL-SDR Dongles

Thanks to OH2BNF for writing in and sharing his plan to build a "Large Scale Raspberry SDR" (LSR-SDR), which will be based on RTL-SDR dongles. To create the LSR-SDR he plans to take a 19" rack which can support up to 40 Raspberry Pi 3's, plus up to 160 USB devices, and turn it into a massive SDR array. The rack is key as it allows for simple power management of all the Pi's and other devices to be connected.

OH2BNF plans to connect 20 or so RTL-SDRs, with some operating individually and with others operating coherently via a common external oscillator. The rack may also contain some transceivers, an ICOM IC-7300, antenna switches, upconverters, LNAs and other hardware too. Once completed he hopes to move the system to a low RFI environment and operate the unit entirely remotely. With this he hopes to solve his local RFI issues. He also writes regarding applications:

Primary objectives are to incorporate automated adaptivity to the system at large – for example leveraging on band condition information, WSPR (Weak Signal Propagation Report) & friends, automated signal detection and decoding, great flexibility in terms of individual cluster nodes being able to fast respond to various needs and tasks, strong emphasis in parallel processing where applicable depending on the problem type and dataset, support for multiple end users benefiting from the computing and reception capacity of the cluster – to name the most significant.

It's an interesting idea for sure, and we hope to see some updates from OH2BNF in the future.

Vote

April 20, 2018

The Lego Pi RTL-SDR FM Radio

Thank you to RTL-SDR.com reader 'JJ' for writing in with a submission for his Lego Pi Radio. JJ's Lego Pi Radio consists of a Raspberry Pi and RTL-SDR and is designed to be an FM Radio, MP3 and internet radio player all in one, with a cute enclosure made out of Lego bricks. The radio is controlled by an external numpad which allows for a number of presets to be chosen from.

The internet radio and MP3 players are handled in software by VLC player and a script written by JJ is used to map the numpad to RTL-SDR FM presets, or MP3 and internet radio functions. The whole unit is run headless and if anything needs to be updated such as internet radio links, JJ simply accesses the unit via an SSH shell. JJ also writes how he had to try 3 different brands of speakers before he found one that could be driven directly from the Pi with adequate sound quality. In the future he hopes to add a bluetooth remote.

One problem that JJ found was that the standard rtl_fm did not produce high quality audio. Fortunately he found the NGSoftFM software which is capable of outputting high quality FM stereo sound and is compatible with RTL-SDR dongles.

In the past we've seen a similar project that was implemented on a BeagleBone Black. The idea in that project was to switch between FM and internet radio depending on the reception quality.

Lego Pi Radio 2

Watch this video on YouTube

Vote