Tagged: esp32-c5

ESP-WiFi-Jam-Detector: A Standalone 2.4 and 5 GHz Interference Detector Built on an ESP32-C5 Touchscreen Board

Back in October, we posted that several projects found that ESP32 microcontrollers can capture raw I/Q samples and therefore be used as an SDR. Now Jordan has written in to share his 'ESP-WiFi-Jam-Detector', a standalone, receive-only interference detector built on the ESPARGOS esp-sdr code and a Waveshare ESP32-C5-Touch-LCD-3.5 touchscreen board.

Using the ESP32-C5's own Wi-Fi receiver, the device sweeps 2400 - 2483.5 MHz and 5150 - 5895 MHz at 80 MS/s, with no PC needed. It learns a 60-second baseline of the normal RF background, then raises an alarm on a raised wideband noise floor, persistent narrowband carriers, or swept signals, while flagging pulsed wideband energy as suspect. The touchscreen shows a live spectrum and waterfall, and with an SD card inserted, it logs every state change and saves a waterfall image centered on each alarm, so you can see what happened while you were away.

The firmware is open-source under GPL-3.0, and a prebuilt binary is available on the GitHub releases page. The README notes that the device can only show that the RF environment has changed, not prove intent, and that a running microwave oven will look like interference on 2.4 GHz.

Screenshots from ESP-WiFi-Jam-Detector running on a Waveshare ESP32-C5-Touch-LCD-3.5
Screenshots from ESP-WiFi-Jam-Detector running on a Waveshare ESP32-C5-Touch-LCD-3.5

AI Disclaimer: Jordan notes that the firmware was written entirely by Claude Code, with Jordan directing it and testing on the hardware.

ESPsoup: Turn an ESP32-C5 into a 2.4 & 5 GHz Pocket Scanner with a Connected Phone or PC

Thank you to Peter Holzhauser for writing in and sharing with us his latest open-source project, 'ESPsoup'. Peter has written in previously to share his Android app, V2X2MAP, which detects and plots vehicle V2X (car-to-car) communications used by some modern cars. His new project, ESPsoup, combines an ESP32-C5 and a connected PC or phone into a fully featured scanner for the 2.4 GHz and 5 GHz bands.

ESPsoup has various features including a live spectrum view up to 80 MHz wide, a sweep mode to monitor larger bandwidths, a GPS-enabled heatmapping tool, Bluetooth analysis tools, an AirTag detector, WiFI analysis tools, a car-to-car V2X monitor, a smart home sensor reader, a drone remote ID detector, a microwave oven detector, and an analog FPV video demodulator and display.

The website notes that if you want to monitor multiple FPV drone video channels, up to eight ESP32-C5s have been tested to work together on a single USB hub connected to a PC.

Peter notes that he is planning to add RTL-SDR support to ESPsoup in approximately two weeks, so keep an eye out on their website for updates.

ESPsoup screenshots from a mobile device.
ESPsoup screenshots from a mobile device.