Tagged: rtl-sdr

Review: FlightAware ADS-B RTL-SDR + LNA Positioning

Recently FlightAware released a new RTL-SDR dongle sold at zero profit at $16.95 USD. It’s main feature is that it comes with an ADS-B optimized low noise amplifier (LNA) built directly into the dongle. FlightAware.com is a flight tracking service that aims to track aircraft via many volunteer ADS-B contributors around the world who use low cost receivers such as the RTL-SDR. In this post we will review their new dongle and hopefully at the same time provide some basic insights to LNA positioning theory to show in what situations this dongle will work well.

FlightAware Dongle Outside
FlightAware Dongle Outside

A good LNA has a low noise figure and a high IIP3 value. Here is what these things mean.

Continue reading →

AISRec Updated to Version 2.1

AISRec is an RTL-SDR (and now Airspy) compatible AIS (automatic identification system) dual channel decoder. AIS is an acronym for Automatic Identification System and is a system used by ships to broadcast position and vessel information. By monitoring AIS transmissions with the RTL-SDR we can build a boat radar system.

Last time we tried AISRec we found its performance to be very good, with it decoding more messages than other software we tried. The new version includes the following updates:

  • Added auto detection of devices when devices are plugged in.
  • Added the support for airspy. Allow selection of devices by serial number for rtlsdr dongles.
  • Added AISRec core 3.0. The new core is 2x faster than AISRec core 2.0.
  • Added one embedded multi-user TCP server. Any client works with AISRec should implement auto reconnection.
  • Added auto display of local IP for the TCP server.
  • Added one output to one serial port.
  • Added interactive changes of gain parameters for devices.
  • A few changes on GUI.
  • Added an icon for GUI. Users should reset the windows icon buffer to allow the display of the new icon.

In addition, while AISRec hopes to be commercial software one day, at the moment they are currently offering free registration. See their FAQ for information on registering for free.

AISRec running with OpenCPN.
AISRec running with OpenCPN.

Using an RTL-SDR on a high powered rocket to capture GPS data

Over on the SDRGPS blog Philip Hahn and fellow aerospace engineer Paul Breed have been working together to try and use an RTL-SDR to help get accurate GPS data for tracking small high powered rockets. They write that their end goal is to be able to “track high power rockets in high acceleration / speed / altitude environments”.

In their latest attempt they launched a rocket with an RTL-SDR on board with it capturing GPS data to be later processed with GNSS-SDR. The goal was to get a GPS fix throughout the flight. Unfortunately they found that a good fix was only obtained while the rocket was on the ground, and not much data was obtained while it was in the air. They write that they suspect that the fault lies in the vibration in the rocket which can affect the frequency stability of the crystal oscillator, or in the GPS satellite tracking loop algorithm.

They still hope to be able to get some usable information from the flight by trying other algorithms on the data, but they are also seeking advice from anyone who might know how to help them, so please contact them if you know anything that may help.

If you are interested in this, then see our previous post about how Philip showed us how to use an RTL-SDR to receive and plot GPS data.

RTL-SDR + GPS antenna plus an Intel NUC computing platform.
RTL-SDR in aluminum case + GPS antenna + an Intel compute stick and IMU.
The rocket carrying the RTL-SDR.
The rocket carrying the RTL-SDR.

RTLSDR4Everyone: The best RTL-SDR setup for $60

Over on his blog RTLSDR4Everyone author Akos has uploaded a new post showing what he believes is the best possible RTL-SDR set up that you can get for under $60. Akos writes that the best combination of components is one of our RTL-SDR Blog dongles (back in stock in a couple of weeks!) with bias tee combined with an LNA4ALL low noise amplifier. The LNA4ALL is a ~$30 USD LNA based on the Minicrcuits PSA4-5043+ component and is sold by Adam 9A4QV who also sells other products such as RF filters.

Akos reminds us that the LNA4ALL can actually be bought from Adam with the bias tee enabled already which saves you from the difficulty of needing to source the required inductor and perform surface mount soldering. The post also explains why  you might want to use an LNA in the first place and how to enable the bias tee on our RTL-SDR.com dongles.

RTL-SDR.com dongle + an LNA4ALL
RTL-SDR.com dongle + an LNA4ALL powered with the bias tee

A new TETRA voice and multiframe SDS decoder

Recently Marek Sebera of ITDS Consulting wrote in to let us know about two new TETRA decoders that they have released. TETRA is a trunked radio communications system that stands for “Terrestrial Trunked Radio”. It is used heavily in many parts of the world, except for the USA.

The first piece of software released is called TETRA Listener and is from the Brmlab hackerspace in Prague. They write that Tetra-Listener is a new program (based on osmo-tetra) that can decode unencrypted voice and data traffic. They also write that it is very easy to set up and install since it uses Vagrant, which is a system that can be used to automatically set up a VMWare or VirtualBox Virtual Machine that has everything set up and ready to go. The instructions for using the software can then be found in the readme of the main tetra-listener page on GitHub.

The second software they have written is what they believe is the world’s first open source TETRA Multiframe SDS decoder. SDS stands for short data service and is the TETRA equivalent to SMS text messages used on a GSM network. They write that their solution can assemble long multiframe SDS messages.

Previously we showed how unencrypted TETRA messages could be listened to using telive in our tutorial. It is good to see alternative solutions now coming out, and in the future we hope to test this new software out.

TETRA SDS Example
TETRA SDS Example

Recent Updates to the JAERO L-Band and C-Band AERO Decoder

JAERO is a program by Jonti that was released late last year which allows us to use a SDR such as an RTL-SDR to receive L-band and C-Band AERO messages. AERO is essentially the satellite based version of ACARS, and the L-band signals contains short ground to air messages with things like weather reports and flight plans intended to be transmitted to aircraft. The C-band signals are the air to ground portion of AERO and more difficult to receive as they require an LNB and large dish. However they are much more interesting as they contain flight position data, like ADS-B.

Over March JAERO has had some minor updates. It is now possible to display planes on a map by using it’s SBS1 protocol output and outputting the data to Virtual Radar Server. The second more recent update now allows JAERO to simultaneously monitor up to two C-band AERO channels. To do this you will need to use the AUX VFO plugin for SDR#.

If you enjoy JAERO, please remember consider donating to Jonti.

Plotting flights positions out of regular ADS-B range which were demodulated from C-Band AERO signals by JAERO.
Plotting flight positions that are out of regular ADS-B range. Demodulated from C-Band AERO signals with JAERO.
Monitoring two C-Band channels in SDR# with the AUX VFO plugin.
Monitoring two C-Band channels in SDR# with the AUX VFO plugin.

RTLSDR4Everyone: ADS-B with an LNA and more Comparisons

Over on the RTLSDR4Everyone blog author Akos has uploaded two new posts. In the first post he discusses his opinion on the recently announced FlightAware ADS-B Optimized ProStick, which is an RTL-SDR with an 1090 MHz optimized LNA built into the front end. He writes that he believes that the claimed 30% increase is not possible with the ProStick as his own tests using an LNA4ALL at the front end only showed a 10% increase in range at most. In his post he also shows that the updated Nooelec R820T2 stick comes with a suction cup holder for it’s supplied antenna.

To add to his post, while we haven’t received the ProStick unit we bought for review yet we believe that the ProStick will improve ADS-B reception a certain amount in some situations, especially for those using the stick in such a way where it is placed right at the antenna, or with a small desktop style antenna with little coax, both with an appropriate ADS-B filter used. However, as Akos also suggests in his post we believe that the superior solution is an external type LNA, like the LNA4ALL.

In his second post Akos also compares our RTL-SDR Blog dongle and two Nooelec dongles using some rtl_power scans. He finds that the latest Nooelec dongle has some further improved components such as a lower noise 3.3V LDO and shielded inductors which appear to further reduce the noise floor. 

ADS-B Filter + LNA4HF + RTL-SDR + Rasberry Pi.
ADS-B Filter + LNA4HF + RTL-SDR + Rasberry Pi.
Noise floor scans
Noise floor scans

Radio Astronomy Tool rtl_power_fftw Updated

The rtl_power program allows you to use the RTL-SDR to perform a power scan over an arbitrarily large portion of the frequency spectrum (within the RTL-SDR’s supported frequency range) by hopping over ~2 MHz swaths of bandwidth. The updated rtl_power_fftw software was originally written by Klemen Blokar and Andrej Lajovic and is an update over the regular rtl_power program. It uses a faster FFT processing algorithm and has several other enhancements that make it more useful for radio astronomy purposes.

Recently Mario Cannistrà has released a new version of rtl_power_fftw which has several additional improvements applied. He intends to use it in his RTL-SDR based radio astronomy IoT project which is presented on his Hackster.io blog. He writes:

I added the following command line parameters:

  • -e param for session duration
    this allows to specify the recording duration in sec, mins… etc just like it was possible with rtl-power
  • -q flag to limit verbosity
    this will allow the various printouts to happen only the first time and not on every scan
  • -m param to produce binary matrix output and separate metadata file
    this will get a file name (no extension) and use it to store the power values in binary format within a .bin file + a metadata text file with .met extension

Summary of my requirements:

  • I wanted to leverage the ability of rtl-power-fftw to specify N average values to integrate for less than 1 second when needed. Plus running multi-MHz scans and storing for several minutes.
  • I wanted to use a binary format instead of the .csv one in order to obtain the smallest possible size since I’m logging all the night long (CSV’s blank delimiters and decimal dots were wasting my precious microSD space)
  • keep high the precision on decimal digits saving float values (could be important for other usages)
  • obtain a complete stream of binary values representing all the bins for each scan, one scan after the other, in a matrix like organization
  • …that would allow me to plot the waterfall extremely fast with gnuplot
  • …and then add specific annotations and file properties/metadata in a more convenient way using python
Example rtl_power_fftw output: A scan of Jupiter's radio emissions.
Example rtl_power_fftw output: A scan of Jupiter’s radio emissions.