uSDR Software Updated to V1.7.0

Thank you to Viol for writing in and letting us know that his uSDR software has recently been updated to V1.7.0. The uSDR software (not to be confused with the unrelated uSDR hardware) is a lightweight general-purpose multimode program for Windows that supports the RTL-SDR, Airspy, BladeRF, HackRF, LimeSDR, and other SDR radios.

Viol highlights the latest features added in the 1.7.0 update below:

  • Fobos SDR frontend native support, the very new SDR from RigExpert
  • bladeRF API v2.5.0 support, oversampling mode up to 122.88 MHz sample rate (do not forget to update FX3 firmware)
  • advanced IQ playback mode, precise timing and streaming
  • improved DSP routines and memory management, minimized CPU load
  • excellent ruler tool for spectrum frequency and amplitude measurements
uSDR Updated to Version 1.7.0. Images shows FobosSDR support.
uSDR Updated to Version 1.7.0. Images shows FobosSDR support.
Tweet
Share
Reddit
Vote
Email

Airspy HF+ Ranger: A New Airspy Product Teased

Over on Twitter/X @lamdbaprog, creator of Airspy products and the SDRSharp software has teased his next upcoming software-defined radio hardware called the "Airspy HF+ Ranger". The Airspy HF+ Ranger prototype was also seen at the Dayton Hamvention through their local Airspy.us reseller.

The specifications appear to be very impressive, with a wide frequency range of 0.5 kHz to 1750 MHz and excellent sensitivity, linearity, and dynamic range figures. The Ranger is based on the same main RF chips used in the HF+ Discovery, so it will retain the relatively small maximum bandwidth capability of 710 kHz. However, for many use-cases this small bandwidth is more than sufficient.

Currently, there is no word on a release date or pricing but given the prototype status, it must be close. We expect this to be priced higher than the Airspy HF+ Discovery which sells for US$169.

Update: A page for the Airspy Ranger is now on the Airspy website. It shows a block diagram and further details. RTL-SDR.COM reader Ladislav has also sent us a PDF with the specs and a Dynamic Performance graph.

Over on Twitter/X, patrons of the Dayton Hamvention event have posted a few pictures of the display.

@lamdbaprog also demonstrates the incredible dynamic range of the Ranger when up against strong pager signals in Paris.

Tweet
Share
Reddit
Vote
Email

Scott Manley Explains GPS Jamming & Spoofing and Why & Who is Causing It

In recent years GPS spoofing and jamming have become quite commonplace. Recently popular YouTuber Scott Manley uploaded a video explaining exactly what GPS spoofing and jamming is and explains a bit about who is doing it and why.

In the video Scott explains how aircraft now routinely use GPS as a dominant navigational sensor and how some commercial flights have been suspended due to GPS jamming. Scott explains how ADS-B data can be used to determine the source of GPS jamming (via gpsjam.org) and shows hotspots stemming from Russia. He goes on to show how drone shows have also failed in China either due to GPS jamming by rival companies or due to Chinese military warship jamming. Scott then explains a bit about GPS and how jamming and spoofing work.

GPS Jamming & Spoofing - How Does It Work, And Who's Doing It?

Tweet
Share
Reddit
Vote
Email

YouTube Video Series on Iridium Satellite Decoding with an Airspy, RTL-SDR Blog Patch Antenna and DragonOS

Over on his YouTube channel, Rob VK8FOES has started a new video series about Iridium Satellite Decoding. Iridium is a constellation of low-earth orbiting satellites that provide voice and data services. Iridium was first decoded with low cost hardware by security researchers back in 2016 as mentioned in this previous post. Being unencrypted it is possible to intercept private text and voice communications.

Rob's video is part of a series, and so far only part one has been uploaded. The first video outlines the hardware and software requirements for Iridium decoding and demonstrates the gr-iridium software. An Airspy and RTL-SDR Blog Patch Antenna are used for the hardware, and the software runs on DragonOS.

Rob writes that in part two he will demonstrate the use of iridium-toolkit, which can be used to extract data and recordings from the Iridium data provided from gr-iridium.

Be sure to subscribe to his YouTube channel so that you are notified when part two is released.

Iridium Satellite Decoding Part 1: The Tutorial That Goes Over Your Head, Literally!

Tweet
Share
Reddit
Vote
Email

Tech Minds: Introducing the SDRplay RSPdx-R2 and SDR Connect Preview 3

At the end of last week, we posted how SDRplay released the RSPdx-R2, an updated version of their RSPdx product. Recently Matt from the Tech Minds YouTube channel received his RSPdx-R2 and has uploaded a video comparing the RSPdx-R2 to the previous model. His results show that the new model has an improved lower noise floor, resulting in signals with higher SNR. 

In his tests, Matt uses the SDR Connect Preview 3 software. This is the latest version of SDRplay's new custom multiplatform software that they are developing. While testing the RSPdx-R2, Matt allows shows some of the new features in SDR Connect Preview 3, including a new Audio peak hold graph, FM MPX view, and a new frequency manager.

Introducing The New SDRPlay RSPdx R2 & SDR Connect Preview 3

Tweet
Share
Reddit
Vote
Email

SDRplay RSPdx-R2 Released

SDRplay has announced the release of their latest product, the SDRplay RSPdx-R2. The RSPdx-R2 is advertised as an enhanced version of their RSPdx software-defined radio. The press release from SDRplay reads:

Jon Hudson, SDRplay Sales and Marketing Director said “Global supply chain support issues have prompted some redesign of existing products to ensure continued supply for our UK manufacturing partners. With each new member of the RSP family, SDRplay tries to include improvements. This has given us the opportunity to offer performance enhancements at the same time as assuring supply”.

  • The RSPdx-R2 provides up to 10MHz spectrum visibility anywhere from 1kHZ to 2GHz with no gaps. It features:
  • Improvements to the RSPdx for MF frequencies and below:
    • Improved noise performance below 1MHz
    • Improved dynamic range below 2MHz both in tuner mode and HDR mode
  • 3 Software selectable inputs, including a BNC input for up to 200MHz
  • A 500kHz LPF for LF/VLF
  • HDR mode for enhanced performance under 2MHz
  • Notch filters on all inputs
  • A rugged steel case

More details on https://www.sdrplay.com/rspdxR2/

The suggested retail price is £188.00 GBP (excluding VAT), $235.00 USD (excluding tax) or €225.60 EUR (excluding tax).

SDRplay recently launched their free multiplatform SDRconnect software which as well as running on Windows, will also run on MacOS and Linux/Raspberry Pi. As with their SDRuno windows software, the emphasis is on “plug and play” making the SDRplay receivers an easy-to-use and low-cost way to discover (or rediscover) the radio hobby for anyone who already uses a computer.

SDRplay has also provided the datasheet of the RSPdx-R2 which can be downloaded here.

The new RSPdx-R2
The new RSPdx-R2
Introducing the SDRplay RSPdxR2

Tweet
Share
Reddit
Vote
Email

DeepRad: Upcoming Modular RTL-SDR System to be CrowdFunded

The company "DeepSea Developments" have recently released news about their upcoming crowdfunding campaign for their 'DeepRad' modular RTL-SDR system. The goal of DeepRad appears to be a modular RTL-SDR that can easily be used as a module on a 'motherboard' PCB of your own design.

DeepRad is currently in the 'Coming Soon' stage on CrowdSupply, and will probably be released for crowdfunding in the next few months.

DeepRad is a modular version of the RTL-SDR, a product beloved by radio enthusiasts. However, DeepRad offers distinct advantages. Its modularity makes integration far simpler, side-stepping the complexities of designing an RTL-SDR from scratch (such as RF considerations and chip stocking issues). DeepRad is a versatile option for integrating many different radio functions into whatever projects you’re working on today.

We want the community to create their own "motherboards" with 1, 3, or as many as 20 DeepRad modules to bring new applications to life. There are three versions of DeepRad we’ll be focusing on for this campaign:

  • DeepRad Module: The bare DeepRad module (no motherboard). The user has to develop a board to use it.
  • DeepRad Single: A single DeepRad module with a motherboard. It has USB Type-C and an antenna connection. It can be used as your regular RTL-SDR with USB.
  • DeepRad Quad: A motherboard with 4 DeepRad modules integrated via a USB hub with a USB Type-A connector.
The DeepRad Quad Motherboard with Four DeepRad Modules
Tweet
Share
Reddit
Vote
Email

QCSuper: Capture 2G/3G/4G/5G Radio Frames with Qualcomm Phones

In the past, we've shown how it's possible to use RTL-SDRs or other SDR devices together with the Airprobe software to analyze data from 2G GSM mobile phones and towers. (Note that it's not possible to listen in on conversations or read SMS data unless you have the encryption code for the recipient phone. This is only capable of showing cell tower basestation telemetry for example).

While not directly related to SDR, readers might be interested to know that a new piece of software called QCSuper has been released which enables similar analysis capabilities for 2G/3G/4G/5G signals through the use of Qualcomm-based phones and modem hardware. To use it you will need a rooted Android phone. The software accesses a diagnostics mode available in Qualcomm devices and makes the data available for view on Wireshark.

[Also seen on Hackaday]

QCSuper Screenshot
QCSuper Screenshot
Tweet
Share
Reddit
Vote
Email