Tagged: satellite

Receiving ISS Data Comms with the RTL-SDR

YouTube user mutezone has uploaded a video showing some data communication packets from the International Space Station (ISS) being received with the RTL-SDR. To receive the packets he used SDRSharp, and piped the audio using a virtual audio cable to the Qtmm AFSK1200 Decoder.

I tried to get the ISS (International Space Station) data comms on 145.825 MHz while the satellite was in orbit close to my location & it worked, even though it can go off frequency due to atmospherics & such. On this day, I caught it when it orbited twice around my location in the space of almost three hours. The data comms was decoded on the 2nd attempt. The antenna I used was an omni placed outdoors, & also using a TV + radio signal booster.
For anyone interested in getting the ISS, you have to wait until it orbits close to your location, & I fully recommend a decent aerial that should be placed externally. You can check the ISS tracker websites to see live updates of when & where it will orbit. Here is a link to one website…

http://www.isstracker.com

List of frequencies link…

http://www.issfanclub.com/frequencies

Talk: Tracking of Low Earth Orbit Satellites with the RTL-SDR

Back in July we posted about Travis Goodspeed’s project on setting up a satellite dish that automatically tracks satellites in low earth orbit, where he uses an RTL-SDR for the radio. Travis gave a talk on this project at the Chaos Communication Congress conference, and the video has now been uploaded to YouTube.

Satellites in Low Earth Orbit have tons of nifty signals, but they move quickly though the sky and are difficult to track with fine accuracy. This lecture describes a remotely operable satellite tracking system that the author built from a Navy-surplus Inmarsat dish in Southern Appalachia.

The entire system is controlled through a Postgres database, fed by various daemons spread across multiple machines. So when I click on a satellite on my laptop or cellphone, it runs “UPDATE target SET name=’Voyager 1′;” and the motor daemon then begins to track the new target while the prediction daemon maintains accurate estimates of its position in the sky. Additional daemons take spectral prints or software-defined radio recordings of the targeted object for later review.

Using the RTL-SDR to listen to the Funcube Satellite

Recently, the FUNcube-1 satellite was successfully launched. The FUNcube is a CubeSat (a low cost miniature 10cm cube sized satellite) which is intended mainly for educating young people about radio, space, physics and electronics, but has also piqued the interest of amateur radio hobbyists.

Amateur radio hobbyist N4JTC’s has shared on his blog his experiences with receiving the FUNcube-1’s telemetry using his RTL-SDR dongle. By using the RTL-SDR to receive the telemetry beacon as the satellite passes overhead, he was able to use the FUNcube Dashboard software to record and decode and view the satellites telemetry data.

Receiving the FUNcube-1 Satellite
Receiving the FUNcube-1 Satellite

Visualizing Broadcast Satellite Signals with the RTL-SDR

Over on Gough’s Tech blog, Lui Gough has posted about his experiences with visualizing broadcast satellite signals with the RTL-SDR. In his post he shows how to receive broadcast satellite signals by using a LNB, or low noise block downconverter, which allows the RTL-SDR to receive satellite frequencies which are typically out of the range of the RTL-SDR.

Later in the post he also shows what several broadcast satellite signals look like on the waterfall, as well as some of their telemetry signals.

Visualizing Satellite Signals
Visualizing Satellite Signals

NOAA Weather Satellite Antenna and Software Guide

Over on the SDR for mariners blog, author Akos has written two new beginners posts on getting up and running with receiving and decoding NOAA weather satellite APT images.

The first post discusses antennas that are useful for NOAA satellite reception, and shows how to build a homemade turnstile and QFH antenna. His second post shows a beginners guide to the software that can be used to decode the APT signal in order to obtain a live weather satellite image.

sdrformariners_apt_image QFH Antenna

Tracking of Low Earth Orbit Satellites with the RTL-SDR

Over on travisgoodspeed.blogspot.com, Travis shows us an interesting project where he set up a satellite dish that automatically tracks and receives moving satellites, such as those in low earth orbit. Travis uses an old satellite dish salvaged from a maritime vessel as the receiving dish, a RTL-SDR for receiving the signal, and a BeagleBone for motor control and running rtl_tcp. The dish motors use satellite positional data from celestrak.com to automatically track a desired currently visible moving satellite.

tracking_satellite

Receiving the FO-29 Amateur Satellite with RTL-SDR

In this video YouTube user Roland Zurmely (PY4ZBZ) shows communications with the FO-29 amateur satellite using his RTL-SDR and a 6 element UHF Yagi antenna. The Fuji-OSCAR-29 (FO-29 a.k.a JAS-2) is an amateur radio satellite that allows voice communication via single side band, and has a voice downlink frequency of 435.8 MHz and uplink frequency of 145.9 MHz.

In this video, the RTL-SDR was used as the satellite receiver, and a conventional FT857 radio with 4 element VHF Yagi was used to transmit to the satellite uplink.

ISS Packet Repeater Received with RTL-SDR

YouTube user ronpaulatemybaby has posted a video showing his reception of the International Space Station (ISS) amateur packet repeater on 145.825 MHz, using the rtl-sdr. He used a R820T dongle, two meter dipole, SDRSharp and decoding software MixW.

RTL SDR International Space Station Packet Repeater 145.825 Mhz