He uses a handicap door button with wireless transmitter that transmits at 300 - 390 MHz, and uses the RTL-SDR on the Raspberry Pi Zero to detect whenever the button is pressed. The button detection algorithm simply looks for an increase in RF energy via an FFT transform. Once a button press is detected by the RTL-SDR and Raspberry Pi the camera and facial recognition software on the Pi activate, and a text to speech algorithm asks the button presser to face the camera for identification. If the face is recognized in the database the speech to text welcomes the user.
Back in 2016 cURLy bOi released a Windows port of the Linux based "Telive" TETRA decoder. Now the latest development in TETRA decoders is that a TETRA decoder plugin for the SDR# software has been released. This makes setting up a TETRA decoder significantly simpler than before.
The plugin doesn't seem to be officially released anywhere, but we did find it thanks to @aborgnino's tweets on Twitter, and he found it on a Russian language radio scanner forum. The plugin is available as a direct download zip from here, but we suggest browsing to the last few posts in the forum thread to find the latest version.
Installing the plugin is a little more difficult that usual, as you first need to install MSYS2 which is a compatibility layer for Linux programs. The full installation instructions are included in the README.TXT in the zip file. One clarification from us: you need to copy the files in the msys_root/usr/bin folder from the zip file into the /usr/bin folder that is in your MSYS2 installation directory.
We tested the plugin and found it to work well without any problems. With the plugin turned on you just need to simply tune to a TETRA signal in WFM mode, and you will instantly be decoding the audio.
TETRA is a type of digital voice and trunked radio communications system that stands for “Terrestrial Trunked Radio”. It is used heavily in many parts of the world, except for the USA. If you have unencrypted TETRA signals available in your area then you can listen in on them with an appropriate SDR like an RTL-SDR and decoder software like the aforementioned plugin.
Johannes Smit wanted to be able to view the live data from his SWR WH2303 weather station and send it to a database. Whilst the weather data acquisition software that he paid for worked well, he thought that there must be a cheaper and more fun way to grab the data. But unfortunately the manufacturers would not respond to his request for the RF protocol specifications. So Johannes decided to reverse engineer the protocol using his RTL-SDR instead.
Next he fired up Universal Radio Hacker (URH) and captured a sample of the weather station signal. Using URH he was able to determine the modulation type (FSK) and the bit length parameter (150us). Johannes' next step was to open the weather station, find the RF chip, look up the RF chip information on the web and find the spec sheet. From the spec sheet and internet forum searches he was able to determine the properties of the packet including the sync word and preamble. With this data he was able to determine the packet structure.
Finally he captured a packet and recorded the exact data shown on the weather station at the time of the packet. With this he was able to search the binary data string for the data shown on the weather station, indicating the location of a particular piece of data within the string.
Johannes' tutorial shows just how powerful tools like Universal Radio Hacker can be, and his tutorial is an excellent start for those looking at reverse engineering any of their own local RF protocols.
Thanks to "gmbertani" for letting us know about his recently released RTL-SDR compatible software called "Echoes". Echoes is a Windows, Linux and Raspberry Pi/Arch compatible tool that can be used together with an RTL-SDR and appropriate antenna to monitor for meteor scatter detections.
Meteor scatter works by receiving a distant but powerful transmitter via signal reflections off the trails of ionized air that meteors leave behind when they enter the atmosphere. Normally the transmitter would be too far away to receive, but if its able to bounce off the ionized trail in the sky it can reach far over the horizon to your receiver. Typically powerful broadcast FM radio stations, analog TV, and radar signals at around 140 MHz are used. By listening to these signal blips it can be possible to estimate the number of meteors falling.
Below we paste the official description and feature list of Echoes, and at the end is a video demonstrating Echoes in action:
Echoes it's a radio spectral analysis software for RTL-SDR devices, designed for meteor scattering purposes.
Echoes doesn't demodulate neither decode any human-made signal. Its main goal is to analyze and record the total power of natural signals and generate screenshots and tabular data (CSV, GNUplot) output in presence of particular peaks in a selected narrow range of frequencies. Since there is no demodulation, there is no provision for audio listening, except for a notify sound when an event has been recorded.
Features
Captures waterfall spectra as PNG screenshots and statistics data files.
Optionally generates GNUplot data files
Multiple instances can manage separate dongles plugged in the same computer
Three operating modes: continuos (records data only), periodic (captures data and screenshot every X seconds) and automatic (record data and screeshot each time a customizable (S-N) treshold is exceeded)
HTML report production
Installers ready for Windows7++ and RPMs / SRPMs for Linux
xz binary package for Raspberry PI / Arch distro
It can run headless, recording GNUplot and statistic data only
Over on his YouTube channel Tom Stiles (hamrad88) has been experimenting with and reviewing our multipurpose dipole kit. Tom is a ham radio YouTuber who runs a show that produces content often, so we encourage you to subcribe to his channel if you're interested. Tom reviewed our dipole kit over a series of 5 videos which we link here [1: Discussing the product], [2: Unboxing], [3: First ADS-B Tests], [4: Second ADS-B Tests], [5: Third ADS-B Tests]. We post have embedded video 2 and 5 below.
In his testing Tom finds that using the antenna in the vertical orientation improves ADS-B performance. This is expected as ADS-B signals are vertically polarized, and so the antenna should be too. By using the included suction cup mount Tom is able to get the antenna attached to his window which improves reception by getting the antenna as close to the outdoors as possible. This is an expected use case for the antenna, and it's good to see that good results are being had!
If you're interested in the set please see our store at www.rtl-sdr.com/store, or use the links provided in Tom's videos. We also have a tutorial and use case demonstrations for our dipole kit available at www.rtl-sdr.com/DIPOLE.
Over on YouTube user radio innovation has uploaded a brief screen capture showing his Raspberry Pi 3 and RTL-SDR dongle being used as an always-on monitor for low transmit power based signals such as FT8, JT65 and JT9. These signals are transmitted by ham radio enthusiasts for the purpose of making contacts, and determining propagation conditions. This is a good application for an RTL-SDR and Raspberry Pi 3 as it enables cheap monitoring of these signals without the need to tie up a full sized ham radio.
To do this "radio innovation" runs Linrad on the Raspberry Pi, which is a program like GQRX that interfaces with the RTL-SDR dongle. Then the WSJTx software is used to decode the signals. He writes:
Remote Desktop screencapture of my Raspberry Pi3 monitor receiver on 40m amateurradio band with WSJTx and decoding FT8,JT65 and JT9. Receiver hardware is RTL-SDR(tcxo) + simple converter and homemade bandpass filter.
SDR software is LINRAD by SM5BSZ.
RasperryPi3 OS is Ubuntu Mate 16.04.
Update:We now have a tutorial on creating a similar set up available on a new post.
Over the last few years Brazil has been moving over to digital TV, and has planned to shut down the old analogue TV signals. Vinicius Lenci (PU2VLW) was watching with his SDR during the analog shutdown that occurred in Pedreira-SP on the 17th of January 2018 (note that the post is in Portuguese but Google Translate can be used). The video on his post captures the end of an era by eerily showing the analog TV audio signal suddenly cutting off and turning to noise. In another video where he was monitoring 16 analog channels with an analog TV receiver shows the channels slowly switching off one by one within a few minutes.
Shortly after the analog TV signals were shutdown, Vinicius notes that a new digital TV signal under test at 571 MHz appeared in place of one of the old analogue signals. Also he notes that the now empty 750 MHz band will eventually be replaced by mobile LTE technology.
Capturing the Analogue TV shutdown in Pedreira, Brazil.
Recently we've come into knowledge of a program on GitHub called "System Bus Radio" which lets you transmit RF directly from your computer, laptop or phone without any transmitting hardware at all. It works on the principle of manipulating the unintentional RF radiation produced by a computers system bus by sending instructions that can produce different AM tones. An SDR like the RTL-SDR V3 or RTL-SDR with upconverter, or any portable AM radio that can tune down to 1580 kHz can be used to receive the tones. To run the software don't even need to download or compile anything, as there is now a web based app that you can instantly run which will play a simple song.
However, the RF emissions don't seem to occur on every PC, or are perhaps at another frequency. We tested a Windows desktop and Dell laptop and found that no were signals produced. A list of field reports indicates that it is mostly MacBook Pro and Air computers that produce the signal, with some transmitting signals strong enough to be received from a few centimeters to up to 2m away. This could obviously be a security risk if a sophisticated attacker was able to sniff these tones and recover data.
This program runs instructions on the computer that cause electromagnetic radiation. The emissions are of a broad frequency range. To be accepted by the radio, those frequencies must:
Be emitted by the computer processor and other subsystems
Escape the computer shielding
Pass through the air or other obstructions
Be accepted by the antenna
Be selected by the receiver
By trial and error, the above frequency was found to be ideal for that equipment. If somebody would like to send me a SDR that is capable of receiving 100 kHz and up then I could test other frequencies.
There is also an interesting related piece of software based on System Bus Radio called 'musicplayer', which takes a .wav file and allows you to transmit the modulated music directly via the system bus.
If you're interested in unintentionally emitted signals from PCs, have a look at this previous post showing how to recover images from the unintentional signals emitted by computer monitors. This is also similar to RPiTX which is a similar concept for Raspberry Pi's.
