NOAA 15, 18, 19 End of Life Announcement – But Transmissions will Continue for Hobbyists

Over on the USradioguy.com blog, we've seen news from Carl Reinmann noting that NOAA 15, 18, and 19 will be classed as end-of-life on June 16, 2025. These NOAA satellites are ones commonly used by RTL-SDR hobbyists to download weather satellite images, either via APT on 137 MHz with a V-dipole antenna, or via HRPT on 1.7 GHz with a tracking dish antenna.

Initially, it was thought that this meant that transmissions would cease. However, Carl Reinmann has now clarified with NOAA that transmissions of the APT and HRPT signals will continue as usual. Importantly, NOAA urges that these transmissions will only be "data of opportunity" and should no longer be used for operational purposes (not for anything safety-critical, for example). The transmissions will be fine for everyday hobbyist use.

However, this does mean that should the sensors on these satellites start failing, no attempt will be made to repair them from the ground, and in case of critical failures, the satellites will be decommissioned. In the past, we've seen NOAA 15's scan motor fail multiple times before coming back to life. It's not clear if the satellite received commands from the ground that helped recover it or if the motor just recovered by itself.

The NOAA satellites have lived well past their operational life.
The NOAA satellites have lived well past their operational life.
Tweet
Share
Reddit
Vote
Email

Building a Mechanical Support for the YouLoop and HFDY Loop Amplifier

Thank you to Marco Cardelli (IZ5IOW) who recently wrote in and shared with us his design for mounting a YouLoop antenna indoors, which he uses with his Airspy HF+ Discovery SDR receiver.

Marco's build involves an MDF wooden base measuring 15cm x 15cm, supporting a vertical mast made from a 70cm long, 25mm diameter PVC pipe. The mast is secured to the wooden base using a repurposed metal bracket and cable ties.

Additionally, Marco constructed square loop enclosure out of 20mm diameter PVC pipe for containing his HFDY active loop, measuring 60cm per side. The HFDY is an active loop variant of the YouLoop, available on sites like Aliexpress.

Marco's YouLoop stand, and the inside of the HFDY active loop.
Marco's YouLoop stand, and the inside of the HFDY active loop.
Tweet
Share
Reddit
Vote
Email

Hearing Lightning with an RTL-SDR

On YouTube, user MatdoFM has uploaded a video demonstrating what lightning sounds like over the radio and how to receive lightning pulse noise using an RTL-SDR.

When lightning strikes it releases a pulse of electromagnetic radiation, which shows up as a short wideband noise pulse over the radio spectrum. Lightning detection and mapping services like Blitzortung use a network of volunteer run VLF receivers spread out across the globe to determine the location of lightning pulses using time of arrival radio direction finding techniques.

In the video, MatdoFM uses a frequency of 124 MHz. Because the lightning pulse noise is so wideband, it extends from VLF to VHF and sometimes even UHF frequencies. At the end of his video, MatdoFM shows a lightning strike captured with his security camera and the corresponding radio sound produced by that strike.

Hear LIGHTNING With Your RTL-SDR!

Tweet
Share
Reddit
Vote
Email

Creating an Open Source DMR Transceiver with a LimeSDR Mini

Thank you to Adrian Musceac for writing and sharing his article detailing how he implemented an open-source DMR (Digital Mobile Radio) transceiver modem with his LimeSDR Mini and GNU Radio.

DMR is a digital voice communications protocol often used by commercial business band radios, as well as by amateur radio hobbyists.

Adrian explains:

I wrote an article about the implementation of an open-source DMR transceiver using the LimeSDR-mini, GNU Radio and Codec2, which could be used for SDR experiments.

The DMR modem was designed to work both in repeater and direct (DMO) mode, and supports voice and other basic features of the ETSI TS 102 361-1 standard.

In the article there is discussion about aspects of the TDMA transmission, time synchronization, as well as how David Rowe's Codec2 can be used to replace the default vocoder.

The work builds upon Jonathan Naylor's extensive DMR implementation which a large number of amateur radio operators are using as part of MMDVM.

DMR TX Flowgraph
DMR TX Flowgraph
Transmitting DMR with the LimeSDR-mini

Tweet
Share
Reddit
Vote
Email

DragonOS: LTE IMSI Sniffing using the LTE Sniffer Tool and an Ettus X310 SDR

DragonOS creator Aaron recently uploaded a video on YouTube showing how to capture IMSI data from an LTE-enabled phone by using the open-source LTE sniffer tool and Ettus X310 software-defined radio.

In the video, Aaron uses a simulated environment involving a Signal SDR Pro to simulate the LTE cell phone, a B205 Mini operating as the eNodeB (base station), and an Ettus X310 SDR for the actual LTE sniffing. The SRSRAN software running on DragonOS is used to simulate the LTE network environment.

Aaron goes on to show how the LTE sniffer software passively decodes the physical downlink control channels and captures IMSI numbers from user cell phones.

An IMSI is a unique identifier associated with a cell phone user's SIM card. IMSI sniffing cannot be used to listen to or decode voice, text, or data as they are all encrypted. However, bad actors can use IMSI sniffing to track the movement of devices/people.

DragonOS Noble Sniff + Passively Capture LTE IMSI (x310, b205mini, SignalSDR Pro)

Tweet
Share
Reddit
Vote
Email

Receiving Elektro-L3 LRIT Weather Satellite Images with an 11-Turn Helix Antenna and No Dish

Typically, a satellite dish is used to receive Elektro L3. As an example, our 70cm diameter Discovery Dish with linear feed can do this easily, and achieve an SNR of about 5-6 dB. However, as Meti shows, it is possible to receive this satellite even without a dish, and as he shows, an SNR of 1.5 dB is sufficient for decoding a perfect image.

Meti's antenna is an 11-turn RHCP helix made of copper wire, with a 17 x 17cm ground plane. In his post, he also notes a few interesting findings, noting that the height of the antenna off the ground is critical, rotating the helix can help, interference from cell towers can cause issues, and bending the corners of the ground plane can help.

In the rest of the post, Meti also shows how well the helix antenna works at receiving weather satellite signals from polar orbiting L-Band satellites like Meteor M2-3.

Meti's 11-Turn RHCP Helix Antenna
Meti's 11-Turn RHCP Helix Antenna
Tweet
Share
Reddit
Vote
Email

New Khanfar Software: Spot Scanner, Phased Based DF, IQ Playback

Recently, software developer M. Khanfar has been releasing a lot of new SDR and RTL-SDR compatible software including a Spectrum Analyzer and FM demodulator, directional antenna based radio direction finder, and a gr-phosphor based spectrum visualizer.

His pace of development continues, and recently he's developed three new programs.

The first is Khanfar Spot Scanner, a tool for detecting active signals. 

Khanfar Spot Scanner is a powerful and feature-rich spectrum analyzer designed for radio frequency enthusiasts, wireless security researchers, and professional RF engineers. Supporting multiple SDR hardware devices including RTL-SDR, Airspy, and HackRF, this software provides comprehensive spectrum visualization, automated signal detection, and in-depth analysis reporting.

Khanfar Spot Scanner

The second software is called "Khanfar Phase-Based Direction Finding" a tool for phase based radio direction finding.

Khanfar Phase-Based DF is advanced direction finding software that uses phase difference analysis to determine the bearing of radio signal sources. Unlike traditional direction finding systems that rely on directional antennas and signal strength comparison, this software utilizes an array of omnidirectional antennas and sophisticated signal processing algorithms to analyze the phase relationships between received signals.

We want to add to this a note that we're not entirely sure how this software can possibly work as phase based direction finding with RTL-SDRs requires synchronized clocks, and sample and phase alignment to be performed via a correlation with a noise source first which this software does not enable. Without those steps taken results will be totally random. We gave this software a brief test with a KrakenSDR, but as expected, did not see the results we expected. We're keen to hear feedback from other users.

Khanfar Phase-Based Direction Finding Software

The third program is called "Khanfar IQ Live-Rec-Playback" a tool for recording and playing back IQ files, with IQEngine integration.

Khanfar RTL-SDR IQ Live+Rec+Playback is a powerful, feature-rich spectrum analyzer application designed for RTL-SDR devices. This professional-grade software provides real-time RF spectrum visualization with GPU-accelerated rendering, comprehensive IQ data recording capabilities in multiple industry-standard formats, and advanced playback features for signal analysis. With IQEngine and IQ Analyzer integration, you can seamlessly export your recorded signals for comprehensive online analysis, visualization, and collaboration.

Khanfar IQ Live-Rec-Playback

Tweet
Share
Reddit
Vote
Email

GOES-19 Completes Transition to GOES-EAST Replacing GOES-16

NOAA GOES satellites are a popular way to receive beautiful full-disk weather images of the Earth using an RTL-SDR, antenna hardware such as the Discovery Dish, and software such as SatDump. The GOES-EAST satellite covers North and South America and was provided by GOES-16 until April 7th.

Over the past few months, NOAA has been moving the GOES-16 satellite into a storage orbit and the newer GOES-19 satellite, which was launched in June 2024, into the GOES-EAST position. Recently, on 7 April 2025, this transition was completed, and the GOES-16 was turned off, and the GOES-19 signal was activated.

For SatDump users, no configuration changes should be necessary to receive signals from GOES-19. However, Sanchez users will need to update their configuration file.

If you're interested, Carl Reinmann, owner of the usradioguy.com website, provides more detailed information about the transition and activation of GOES-19.

GOES-19 Received by Carl Reinmann
GOES-19 Received by Carl Reinmann
Tweet
Share
Reddit
Vote
Email