Airspy have released their black Friday 2020 deals today with 30% off. Back in 2019 we saw that the black friday deals were the best time to purchase an Airspy and we don't expect pricing to get cheaper than this. Links to their distributors can be found on airspy.com.
Airspy sell a range of software defined radios. The HF+ Discovery is one of the best (if not the best) low cost HF SDRs we've ever tested, and the Airspy Mini and R2 are good wide band VHF/UHF radios that are a step up from RTL-SDRs. The SpyVerter is a good upconverter that is also compatible with RTL-SDRs, and can be used with the bias tee on the RTL-SDR Blog V3.
The sale brings the pricing down to the following prices in USD (plus shipping costs):
For some time now many weather satellite enthusiasts have enjoyed the ability to relatively easily receive live high resolution images directly from the GOES-16, GOES-17 and GK-2A geostationary satellites (tutorial here). However, while much of the world can see at least one of these satellites, European's have been left out.
What may be of some interest to Europeans is that the older GOES-13 (aka EWS-G1) satellite was repositioned in February 2020, and it can now be received in Europe (as well as Africa, the Middle East, Asia, Russia and West Australia) until at least 2024 when it will be replaced.
The important catch however is that GOES-13 is not broadcasting the same easy to receive LRIT/HRIT signals that the other satellites use. The signal is still in the L-Band at 1685.7 MHz, however it is called "GVAR" and it is much weaker and uses 5 MHz of bandwidth. For GOES 16/17 and GK-2A a 1m WiFi grid dish, LNA and RTL-SDR was sufficient, but for GOES-13 you'll need a much larger 1.8m dish, and a wider band SDR like an Airspy. The big dish requirement significantly increases the reception challenge.
We also note that the decoder is being developed by @aang254 and u/Xerbot and it is not yet publicly released. However, they do intend to release it soon. Update:
My hardware is: 180cm prime focus dish, with a custom cantenna (120mm diameter). I'm using the SAWBIRD GOES LNA. I will be switching to the + version, because the setup is still lacking a few db SNR. The SDR is the one I use for HRPT: the airspy mini
I found that the USB connection on the airspy generates a lot of noise, so I removed the USB cable, by moving the airspy to the laptop. I use 2m of CNT-400 coax and it works much better now. I get about 2 db SNR more. Thought you might find it interesting.
@ZSztanga's GOES-13 Reception Setup, with 1.8m dish.
We note that there is some interesting differences with GOES-13 images. Since the image is less processed, it is higher resolution (a full resolution image can be found on this Reddit post), as well as not cropped, meaning that the Earth's atmosphere is visible. Please also follow @ZSztang on Twitter for more images.
According to the newest calculations performed (by me) on the EWS-G1 data, it has a stunning resolution of about 0.6x1 km/px on the VIS channel and about 2.5x4 km/px on the IR channels. I have yet to confirm my calculations with the doc, which is quite hard to get. pic.twitter.com/kLK8YPDyTV
What I really like about GOES-13 is that the data is unprocessed. That allows to see the atmosphere which is normally cut off on LRIT/HRIT. pic.twitter.com/BWJAVXFnUi
SDR# is a very popular Windows SDR program often used with the RTL-SDR and Airspy SDR. One drawback is that it lacks native Linux compatibility. In the past it has been possible to run SDR# via WINE, however some newer updates were thought to have broken that ability. WINE is a Windows emulator that allows some Windows programs to run under Linux.
However, recently on Twitter we've seen a Tweet by @albinstigo indicating that SDR# can indeed run on Ubuntu 20.04 via WINE 5.0. In a Tweet he explains the steps which are quite simple:
One limitation is that the emulated SDR# cannot connect to the SDR natively via the USB. So you will need to use TCP server software such as rtl_tcp or SpyServer to get it to work. Basically, run the server on the native Linux environment, then connect to it in SDR# running on the emulated Windows environment.
1. Install wine via apt.
2. Install dotNET 4.8 via winetricks.
3. Install the Verdana font via winertricks.
4. Enjoy SDR.
In Frugal Radio's latest video he explores how you can use an Airspy or RTL-SDR dongle to scan the entire military UHF airband spectrum in a few seconds via SDR#. Frugal Radio notes that there are often many signals in the UHF milair band, but they can be difficult to find without a scanner.
In the first video he compares his Uniden BCT15X hardware radio scanner against an Airpsy, noting that his Uniden takes 1:10 minutes to scan the entire band, whereas the Airspy running SDR# with the frequency scanner community plugin can scan the same bandwidth in less than 2.5 seconds. Faster scanning means that you are less likely to miss an active signal. In the second video he tries scanning with an RTL-SDR and notes that it can scan the band in 9 seconds.
How to use Frequency Scanner to Search UHF MilAir in 2.3 seconds in SDR# using AirSpy R2
$25 RTL-SDR v3 Military Air band search in under 10 seconds! Frequency Scanner SDR Sharp plugin test
Over on his latest video Tech Minds' explores the use of TempestSDR to eavesdrop on video monitors with his Airspy Mini. TempestSDR is a program that we've posted about several times in the past. With an RTL-SDR or other compatible SDR like a HackRF it allows you to reconstruct an image from a computer monitor or TV just from the radio waves unintentionally emitted by the screen or cable. SDRs with larger bandwidths like the HackRF or Airspy are better at reconstructing the image as they can collect more information.
In his video Tech Minds shows how to download and setup one of the newer branches of TempestSDR which unlike older versions doesn't require much installation work. Using an Airspy Mini he shows that he is able to view what is on his screen via the emitted RF waves.
Eavesdropping Video Monitors With TempestSDR RTL-SDR
TempestSDR is an open source tool made by Martin Marinov which allows you to use any SDR that has a supporting ExtIO (such as RTL-SDR, Airspy, SDRplay, HackRF) to receive the unintentional signals radiated from a screen, and turn that signal back into a live image. This can let you view what is on a screen through a wall without using any physical cables.
We first posted a demonstration of TempestSDR back in 2017 when we were finally able to get it to compile. Compiling the software took a fair amount of work for those without experience, and even running it was a chore. However, getting it to work is worth it as you can do some really interesting demonstrations.
However these problems are over and recently Erwin Ried @eried has made a self-executable version of TempestSDR. This means that no compilation, java installs, mingw or extra dlls are required to get the program to work as now it's just an exe that you can run. You will still need the appropriate ExtIO dlls for your SDR. The video in his twitter post shows it working with a HackRF.
Thank you to Robin from the "Frugal Radio" channel on YouTube for submitting his latest video which is a review of the Airspy YouLoop antenna that we currently have for sale on our store for $34.95 including shipping.
The YouLoop is a low cost passive loop antenna for HF and VHF. It is based on the Möbius loop design which results in a high degree of noise cancelling. However the main drawback is that it is a non-resonant design, which means that it needs to be used with ultra low MDS receivers like the Airspy HF+ Discovery. However, a high performance HF pre-amp will be available in the future which will allow it to work well with other radios too.
In his video Robin tests the YouLoop on the HF bands with an Airspy HF+ Discovery and he demonstrates excellent noise free reception from his location. In terms of his setup he notes:
I am running Spyserver on a 10 year old Windows 7 laptop in the loft. The same laptop is also running 3 x SDRSharp instances (following 2 digital trunking systems). It runs 4 x simultaneous Zello instances each providing a high quality audio feed to my Network Radio / phone.
In terms of noise-creating equipment nearby, there is
a second laptop used for other duties
a Pi 3B used for ADS-B reception, feeds & a second instance of spyserver
a Pi 3A with MMDVM module performing as a hotspot
a Motorola HT charger
5 x base station scanners
This means there are 10 x switched mode power supplies constantly running, as well as 4 x 24/7 WiFi devices.
All this equipment is within 10ft of the YouLoop antenna, was one of my primary reason for choosing a passive loop.
Since making the video, cable clips have been added provide support to the antenna which means it is now in the correct shape of a loop. That means I am unable to rotate the antenna to make use of the nulls when receiving. However I am very pleased with the performance based on the location, noisy environment, and frugal pricing :-)
$35 Airspy YouLoop Passive Antenna Review : tested on HF using Airspy HF+ Discovery SDR
Over on YouTube Tech Minds has uploaded his latest video that shows how to easily update the firmware on Airspy R2 and Mini units. The Airspy R2 ($169) and Airspy Mini ($99) are two software defined radios that can be considered a step up from an RTL-SDR in terms of performance and price. Recently the Airspy developer updated the firmware, and we show the changelog below.
This release improves the overall phase noise, tuning accuracy, dynamic range and spur responses.
What changed:
More accurate R820T/2 tuning.
Fast R820T/2 register update by only sending the actual changes. Useful for fast scanning.
The R820T/2 reference clock is now fed directly from the 25 MHz TCXO. No noise contribution from PLL_A at all when using the internal TCXO.
The MCU and ADC reference clock is now using PLL_B of Si5351 in Integer mode with power of two dividers.
EXT_CLK now feeds PLL_A for the R820T/2 and PLL_B for the LPC4370 with optimal Integer Mode and power of two dividers.
Drive level reduced to 2mA per clock. This significantly reduces the spurs.
Tech Mind's YouTube video shows us how to check the current firmware installed, how to download the latest firmware, and finally how to actually flash the new firmware.
AIRSPY R2 & MINI Software Defined Radio Firmware Update Procedure
