Tagged: rtl2832u

Monitoring a Trunked P25 LSM Simulcast System with OP25 and an RTL SDR

Over on YouTube user jdlucas78 has uploaded a video showing a P25 LSM modulated digital voice signal being decoded by the Osmocom OP25 software for Linux. Although DSD and DSD+ can decode P25 voice, it seems that the Osmocom OP25 software is better at decoding P25 signals as it implements better error correction algorithms.

Over on the RadioReference forums there is a thread discussing the use of the OP25 decoding software which can be found here. There is a post in the thread that shows an easy Linux install procedure for the OP25 software.

Monitoring a Trunked P25 LSM Simulcast System w/ OP25 and RTL SDR Dongle

Take 2: Monitoring a Trunked P25 LSM Simulcast System w/ OP25 and RTL SDR Dongle

Decoding Oregon Scientific Weatherstation Messages using Gnuradio

Recently a reader of rtl-sdr.com, DO2BJK wrote in to let us know about his project where he used GNU Radio to decode Oregon Scientific V1 and V2 weather station messages. To receive the weather station messages which are sent in the ISM band at 433 MHz, DO2BJK used a USRP B210, but he writes that other SDRs such as an RTL-SDR or HackRF will also work. To decode the signal, DO2BJK took the usual steps of recording the signal and looking at the audio waveform in Audacity. From the waveform he was able to determine the bit string and discover the preamble, sync and data parts of a packet. He then used GNU Radio and wrote a Python program to receive the signal and automatically detect the preamble and extract the temperate data. His code is available on GitHub at https://github.com/bkerler/OregonDecoder/.

Bit string signal interpretation
Bit string signal interpretation

Listening to EPIRB Distress Beacons with the RTL-SDR

Over on YouTube user Tom Mladenov has recently been using his RTL-SDR to listen to EPIRB distress beacons transmitted by the SARSAT payload carried by the NOAA 18 satellite. To do this he uses a 6.5 turn helix antenna that is resonant on 1.5 GHz.

An EPIRB is a maritime device that is used to send out a distress beacon for vessels in serious trouble. The EPIRB beacon transmits data that contains GPS coordinates of the vessel at 403 MHz to the satellite. The data is then retransmitted to a mission control centre at 1.5 GHz.

Note that the professional version of MultiPSK can be used to decode EPIRB signals.

(YouTube Videos Removed)


New SDR# Plugin: PAL / SECAM TV

The SDR# plugins programmer over at rtl-sdr.ru has recently released a new plugin which allows the decoding of PAL / SECAM TV images from within SDR# (note link in Russian, use Google translate or see the download link at the bottom of the page). The author also writes that if you are using a newer software defined radio like an Airspy, you can also receive the audio channel using the SDR# multiple VFO plugin.

We note that there is also the TVSharp software by the same author which is a standalone program that can decode PAL and NTSC.

PAL / SECAM TV SDR# Plugin
PAL / SECAM TV SDR# Plugin

RTL-SDR with GQRX Running on an Odroid C1 at 1 MSPS and Max FFT

Over on YouTube user neutron2025 has uploaded some videos showing GQRX running on an Odroid C1. The Odroid C1 is a low cost ($35 USD) mini computer with an Arm Cortex A5 quad core CPU and 1 GB RAM which runs Ubuntu 14.04 or Android KitKat. It is a much more powerful competitor to the Raspberry Pi which also goes for around the same price.

Despite its low cost, the video by neutron2025 shows that the Odroid C1 has enough processing power to run the relatively CPU intensive GQRX SDR software with the RTL-SDR at a 1 MSPS sampling rate and maximum FFT resolution.

To install GQRX, GNU Radio also needs to be installed. Installation of GNU Radio is a lengthy process containing many writes to the file system. The amount of writes that occur could destroy a SDCard. To get around this neutron2025 connected an external hard drive and used that as a swap file while installing GNU Radio. His installation notes can be found on pastebin. He writes that installation took around 8 hours.


RTL-SDR / Odroid C1 / GQRX / 2msps / Max FFT

Techniques for using the RTL Dongle for Detecting Meteors

Back in 2013 we posted about a Dr. David Morgan who had written a tutorial paper discussing how he used the Funcube Dongle Pro+ for radio astronomy. Recently Dr Morgan has also written another paper showing how to use the RTL-SDR together with the Spectrum Lab software to detect meteors.

A software defined radio can be used to detect and count meteors entering the earth’s atmosphere by detecting strong radio waves reflected by ionized trails left by the meteor. If you are unfamiliar with how to detect meteors using radio waves, you should consult Dr Morgans older papers called Detection of Meteors by RADAR, Meteor Radar SDR Receiver (Funcube Dongle), and Antennas for Meteor Scatter. The tutorial shows how to set up SDR# and Spectrum Lab to work together to detect meteors using the Graves Radar in France at 143.050 MHz.

Meteor Scatter Detection in Spectrum Lab
Meteor Scatter Detection in Spectrum Lab

Receiving VLF with an Upconverter and Direct Sampling RTL-SDR

Recently amateur radio hobbyist DE8MSH wrote in to let us know about how he was able to receive VLF (Very Low Frequency) signals using a very rare Refcom FC-VLF upconverter and his direct sampling modified RTL-SDR.

His antenna is the PA0RDT mini whip which requires 12v of power that is delivered directly by the Refcom FC-VLF. He writes that the Refcom upconverter is used to upconvert the 9 to 50 kHz range into the 14.009 to 14.050 MHz range which is receivable by a direct sampling modified RTL-SDR. Using this set up he was able to receive several VLF stations as shown on the waterfall image below.

15 - 70 kHz VLF Received with an Upconverter and Direct Sampling RTL-SDR
15 – 70 kHz VLF Received with an Upconverter and Direct Sampling RTL-SDR

DE8MSH also writes

Note that I’m not living in a quiet area. As you can see there is a lot of men made noise like from tv sets, lights bulbs etc. pp. Some signals are not very strong becaus I switched the Refcom to 9-50kHz filter. So some stations above 50kHz could be stronger.

Below are some close up shots of VLF signals being received.

17 to 27 kHz
17 to 27 kHz
37 to 47 kHz
37 to 47 kHz
47 to 57 kHz
47 to 57 kHz
67 to 77 kHz
67 to 77 kHz
77 to 87 kHz
77 to 87 kHz

Chaos Communications Congress Talks – Iridium Pager Hacking

A few days ago the Chaos Communications Congress (a technology and hacking focused conference) commenced. Among the talks there was one about reverse engineering the Iridium satellite paging system using software defined radio. Iridium satellites provide global communications via special satellite phones, pagers and other transceivers.

In the talk the speaker shows how they used a USRP radio together with a cheap active iridium antenna, a bandpass filter and an LNA to receive the Iridium satellite signals. They also mention that an E4000 RTL-SDR together with an LNA and appropriate home made antenna for frequencies in the ~1.6 GHz region can also be sufficient. Once they were able to receive signals they were then able to reverse engineer the signal and create several pieces of software to decode the pager messages. The code is available on their GitHub at https://github.com/muccc/iridium-toolkit.

Sec, schneider: Iridium Pager Hacking