Tagged: DMR

TechMinds: OpenWebRX Feature Overview And Raspberry Pi Setup

Over on YouTube TechMinds has posted his latest video which shows an overview of the features available in OpenWebRX, and also how to set it up on a Raspberry Pi. OpenWebRX is software which allows you to access your SDR remotely via the internet or local network through a web browser. All major SDRs are supported including RTL-SDRs. The software includes a waterfall display, all the standard demodulators, as well as several digital decoders for DMR, YSF, NXDN, D-Star, POCSAG, APRS, FT8, FT4, WSPR, JT65 and JT9.

In the video TechMinds first demonstrates OpenWebRX in action, showing reception of HF SSB amateur radio signals, decoding FT8 and plotting received grids on a map, decoding and plotting APRS on a map and decoding YSF/DSTAR/DMR digital voice. After this demonstration he goes on to show how to set up the OpenWebRX server on a Raspberry Pi via the installation image.

OpenWebRX Feature Overview And Raspberry Pi Setup

Tech Minds: Testing the OpenEar DMR TETRA ADSB POCSAG Decoder for RTL-SDR

Back in March we posted about the release of OpenEar, a standalone TETRA decoder for the RTL-SDR. Since then OpenEar has undergone massive developments, not only improving upon the TETRA decoder, but adding DMR, ADS-B and POCSAG decoders as well as a waterfall display.

Recently Tech Minds reviewed this software on his YouTube channel. In the video he shows how to download the software, install the rtlsdr.dll file, and run and use the software. He then demonstrates reception of an amateur radio DMR repeater, reception of POCSAG pager messages and finally reception of ADS-B aircraft messages.

OpenEar Digital Decoder - DMR TETRA P25 ADSB POCSAG RTL-SDR

OpenEar Updated to Version 1.6

The RTL-SDR compatible multi-mode digital decoder OpenEar has recently been updated to version 1.6. The latest version currently supports the decoding of FM/AM, TETRA, DMR, Pocsag and ADS-B. New features include a zoomable waterfall and other GUI and functionality improvements. The changelog reads:

6/4/2020
version 1.6.0
- saving last settings
- waterfall
- zoom on spectrum and waterfall with mouse wheel
- better list placement (pocsag & ads-b)
- wav(I/Q) loading (only 1024000 Sample/sec)
- voice volume & mute button
- spectrum range and offset
- rtl gain and correction (ppm)
- top menu
- frequency list
- some DMR improvement on SYNC detection
- solved center frequency issue (DC problem)
- and other few UI improvements

OpenEar Version 1.6
OpenEar Version 1.6

OpenEar Now Supports TETRA, DMR, POCSAG, ADS-B

Back in March we posted about "OpenEar" which was a newly released Windows TETRA decoder for RTL-SDR dongles. Back then the author "moneriomaa" noted that he planned to add several new modes. In the release that is currently available, OpenEar now supports TETRA, DMR, Pocsag, ADS-B as well as standard AM and NFM modes. We tested the software, and all modes appear to decode as advertised. In the future the author plans to add more modes such as MPT-1327 and AERO.

In the previous post we added an update noting that OpenEar appeared to be violating the GPL licence of OsmocomTETRA, and the author noted that he would remove the TETRA functionality until licencing was resolved. As TETRA decoding is back in the recent releases we assume these legal issues have been solved.

In the current release you also need to provide your own rtlsdr.dll file, which can be obtained from your SDR# folder, or directly from the Osmocom windows release (rename librtlsdr.dll to rtlsdr.dll).

Latest OpenEar Version
Latest OpenEar Version

DSDPlusUI: A Graphical User Interface for DSD+

Over on Twitter Annunaki (@StupotSinders) has been teasing some screenshots of a GUI for DSD+ that he's been developing over the past few weeks. And now he has released the software which is called "DSDPlusUI". DSD+ is mostly command line based, so a GUI could be useful for newbies. The software can be downloaded from the DSDPlusUI groups.io page.

DSD+ (aka Digital Speech Decoder) is a free closed source program that is compatible with RTL-SDR and various other SDRs which is used to decoder digital speech protocols such as P25 P1, DMR, NXDN and more. DSD+ Fastlane is a paid upgrade which allows subscribers to receive the latest updates to the software early. 

DSD+ GUI by Annunaki
DSD+ GUI by Annunaki

Radio Analyser: New Program for Plotting DSDPlus Statistics

Thank you to Matthew Cowley for submitting news about his new program called "Radio Analyser". Radio Analyser is a program that imports DSDPlus radio and group files into a postgresql database. The data can then graphed on the web interface allowing you to view talk group and radio statistics. DSDPlus is a program that can be used to listen in to digital P25, DMR and other digital voice protocols with an RTL-SDR or similar SDR.

Matthew writes the following, and some screenshots of the interface and graphs are shown in the slider and the end of the post:

I've been learning Ruby on Rails and as a first project I wrote a project that you host at home which imports the DSDPlus.radios and DSDPlus.groups files and displays their activity in graph form. It will show you total site activity, talk group activity and radio activity.

Tweet
Share16
Reddit
Vote
Email
16 Shares

TechMinds: OpenWebRX Feature Overview And Raspberry Pi Setup

Over on YouTube TechMinds has posted his latest video which shows an overview of the features available in OpenWebRX, and also how to set it up on a Raspberry Pi. OpenWebRX is software which allows you to access your SDR remotely via the internet or local network through a web browser. All major SDRs are supported including RTL-SDRs. The software includes a waterfall display, all the standard demodulators, as well as several digital decoders for DMR, YSF, NXDN, D-Star, POCSAG, APRS, FT8, FT4, WSPR, JT65 and JT9.

In the video TechMinds first demonstrates OpenWebRX in action, showing reception of HF SSB amateur radio signals, decoding FT8 and plotting received grids on a map, decoding and plotting APRS on a map and decoding YSF/DSTAR/DMR digital voice. After this demonstration he goes on to show how to set up the OpenWebRX server on a Raspberry Pi via the installation image.

OpenWebRX Feature Overview And Raspberry Pi Setup

Tweet
Share16
Reddit
Vote
Email
16 Shares

Tech Minds: Testing the OpenEar DMR TETRA ADSB POCSAG Decoder for RTL-SDR

Back in March we posted about the release of OpenEar, a standalone TETRA decoder for the RTL-SDR. Since then OpenEar has undergone massive developments, not only improving upon the TETRA decoder, but adding DMR, ADS-B and POCSAG decoders as well as a waterfall display.

Recently Tech Minds reviewed this software on his YouTube channel. In the video he shows how to download the software, install the rtlsdr.dll file, and run and use the software. He then demonstrates reception of an amateur radio DMR repeater, reception of POCSAG pager messages and finally reception of ADS-B aircraft messages.

OpenEar Digital Decoder - DMR TETRA P25 ADSB POCSAG RTL-SDR

Tweet
Share70
Reddit
Vote
Email
70 Shares

OpenEar Updated to Version 1.6

The RTL-SDR compatible multi-mode digital decoder OpenEar has recently been updated to version 1.6. The latest version currently supports the decoding of FM/AM, TETRA, DMR, Pocsag and ADS-B. New features include a zoomable waterfall and other GUI and functionality improvements. The changelog reads:

6/4/2020
version 1.6.0
- saving last settings
- waterfall
- zoom on spectrum and waterfall with mouse wheel
- better list placement (pocsag & ads-b)
- wav(I/Q) loading (only 1024000 Sample/sec)
- voice volume & mute button
- spectrum range and offset
- rtl gain and correction (ppm)
- top menu
- frequency list
- some DMR improvement on SYNC detection
- solved center frequency issue (DC problem)
- and other few UI improvements

OpenEar Version 1.6
OpenEar Version 1.6
Tweet
Share348
Reddit
Vote
Email
348 Shares

OpenEar Now Supports TETRA, DMR, POCSAG, ADS-B

Back in March we posted about "OpenEar" which was a newly released Windows TETRA decoder for RTL-SDR dongles. Back then the author "moneriomaa" noted that he planned to add several new modes. In the release that is currently available, OpenEar now supports TETRA, DMR, Pocsag, ADS-B as well as standard AM and NFM modes. We tested the software, and all modes appear to decode as advertised. In the future the author plans to add more modes such as MPT-1327 and AERO.

In the previous post we added an update noting that OpenEar appeared to be violating the GPL licence of OsmocomTETRA, and the author noted that he would remove the TETRA functionality until licencing was resolved. As TETRA decoding is back in the recent releases we assume these legal issues have been solved.

In the current release you also need to provide your own rtlsdr.dll file, which can be obtained from your SDR# folder, or directly from the Osmocom windows release (rename librtlsdr.dll to rtlsdr.dll).

Latest OpenEar Version
Latest OpenEar Version
Tweet1
Share196
Reddit
Vote
Email
197 Shares

DSDPlusUI: A Graphical User Interface for DSD+

Over on Twitter Annunaki (@StupotSinders) has been teasing some screenshots of a GUI for DSD+ that he's been developing over the past few weeks. And now he has released the software which is called "DSDPlusUI". DSD+ is mostly command line based, so a GUI could be useful for newbies. The software can be downloaded from the DSDPlusUI groups.io page.

DSD+ (aka Digital Speech Decoder) is a free closed source program that is compatible with RTL-SDR and various other SDRs which is used to decoder digital speech protocols such as P25 P1, DMR, NXDN and more. DSD+ Fastlane is a paid upgrade which allows subscribers to receive the latest updates to the software early. 

DSD+ GUI by Annunaki
DSD+ GUI by Annunaki
Tweet
Share102
Reddit
Vote
Email
102 Shares

Radio Analyser: New Program for Plotting DSDPlus Statistics

Thank you to Matthew Cowley for submitting news about his new program called "Radio Analyser". Radio Analyser is a program that imports DSDPlus radio and group files into a postgresql database. The data can then graphed on the web interface allowing you to view talk group and radio statistics. DSDPlus is a program that can be used to listen in to digital P25, DMR and other digital voice protocols with an RTL-SDR or similar SDR.

Matthew writes the following, and some screenshots of the interface and graphs are shown in the slider and the end of the post:

I've been learning Ruby on Rails and as a first project I wrote a project that you host at home which imports the DSDPlus.radios and DSDPlus.groups files and displays their activity in graph form. It will show you total site activity, talk group activity and radio activity.

Tweet
Share24
Reddit
Vote
Email
24 Shares

Some tips on using DSD+ and SDR# to Listen to DMR Digital Voice

Over on YouTube user knoxieman has uploaded a video that provides a few tips on using DSD+ and an RTL-SDR for listening to DMR digital voice signals. The video is designed as a companion to Tech Minds' video which shows a full set up procedure for DSD+.

Knoxieman's video includes some tips on SDR# settings, virtual audio cable setup, and using a program called "DisplayFusion" to keep the DSD+ event windows permanently on top of the SDR# window. 

Tips on using SDR Plus and DSDPLUS to listen to DMR/DIGITAL conversations.

Tweet12
Share60
Reddit
Vote
Email
72 Shares

Creating a Wireless Pi-Star Nextion Display for Amateur Digital Radio

Thanks to Steve K2GOG of The Hudson Valley Digital Network (HVDN) for submitting his post on how to create a wireless display for Pi-Star. Pi-Star is a pre-built Raspberry Pi image for amateur radio users experimenting with digital voice communications like D-STAR and DMR. They write that it can be used for applications such as a "single mode hotspot running simplex providing you with access to the increasing number of Digital Voice networks, [or a] public duplex multimode repeater".

Pi-Star is compatible with serial based LED displays with built in GUIs like the Nextion. The displays are usually connected directly to the Raspberry Pi, but Steve wanted to use the display remotely. To do this he used a simple and inexpensive 70cm band HC-12 wireless serial port adapter. With the wireless adapters connected to the Pi he was able to see the pulses in SDR# via his RTL-SDR to confirm that the wireless serial signal was being sent. He then connected the second wireless adapter to the Nextion display via a few diodes to drop the voltage, and was able to get the display updating as if it was connected directly.

In the post Steve mentions that HVDN are also giving away an HC-12 and RTL-SDR to the first person to submit some progress with this idea.

Creating a wireless Nextion Display for Pi-Star.
Creating a wireless Nextion Display for Pi-Star.
Tweet7
Share30
Reddit
Vote
Email
37 Shares