Tagged: rs41

RS41 and M20 Android Decoder: A Standalone Radiosonde Decoder Android App for RTL-SDR

Back in June 2025, we posted about a radiosonde decoder and tracker program for Windows written by Mario Ančić (9A4AM). Mario has now written in again to share a new radiosonde decoder for Android, which works with an RTL-SDR dongle connected via a USB OTG adapter. As far as Mario is aware, it is the first standalone Android app dedicated to radiosonde decoding, as other solutions only offer it as an add-on within a larger SDR program.

The app decodes the common RS1729 radiosonde protocol and supports Vaisala RS41 and Meteomodem M20 sondes, with the type detected automatically, so you only need to enter the frequency and start decoding. As it is designed for radiosonde hunters, it skips PTU (pressure, temperature and humidity) data and focuses on position, altitude, speed, climb rate and heading. A 'Geo App' button passes the sonde's coordinates to your map app as a marker.

The decoder runs via the 'SDR driver' app by Signalware and was tested with our RTL-SDR Blog V3 and V4. The code is open source under the GPL-3.0 licence and available on GitHub, with the APK in the Releases section. Since the app runs as a background service, Android's battery optimization settings may need adjusting for it.

RS41 and M20 Android Decoder Screenshot
RS41 and M20 Android Decoder Screenshot

AI Disclaimer: The project README notes that parts of the code were written with the help of an AI assistant and reviewed by the author.

NyxScope: A Windows Multi-Protocol SDR Decoder Program with Multiple Digital Native Decoders

WARNING: Multiple people have noted that this program is not working as expected and may be overly buggy.

Recently, we've learned about NyxScope, a multi-protocol SDR receiver program for Windows that comes with multiple native decoders built right into the software. Their own description describes this all-in-one program best:

You get spectrum and waterfall, multiple concurrent VFOs, trunked-radio following, digital voice, aviation and marine tracking, paging, ISM sensors, HD Radio, and transcription, in one binary.

NyxScope includes decoders for P25 Phase 1 and Phase 2 voice, EDACS and NXDN control channels, ADS-B, AIS, ACARS, POCSAG, FLEX, LoRa CSS PHY + LoRaWAN MAC, Morse, RDS, CTCSS/DCS, Iridium decoding (with voice), and also includes a signal classification tool, Bluetooth LE scanner, and Whisper voice-to-text transcriber. It also outsources decoding of other protocols to mature decoding software such as multimon-ng, rtl_433, dsd-neo, nrsc5, direwolf, dumpvdl2, dump978, rs41mod where required, noting that the outsourced decoders are bundled with the software, meaning no extra installation work is required.

The software supports RTL-SDR, HackRF, Airpsy, bladeRF, SDRplay, Fobos and PlutoSDR. It also supports using multiple SDRs used in parallel.

The software does not appear to be open source, but it is provided for free with a limitation of 3 concurrent VFOs and a limitation on recording, transcribing, and pager messages. A perpetual per-machine license for $89.95 can be purchased to lift these restrictions and add access to their FCC frequency lookup database.

AI-Disclaimer: While the developers have not noted any use of AI tools, we suspect that AI was used in the creation of this software.

NyxScope Screenshot Scanning the 800 MHz Band
NyxScope Screenshot Scanning the 800 MHz Band

SDRangel Now Available on Android: Mobile ADS-B, AIS, APT, Digital Voice, POCSAG, APRS, RS41 Radiosonde Decoders

SDRangel is a free open source software defined radio program that is compatible with many SDRs, including RTL-SDRs. SDRAngel is set apart from other programs because of it's huge swath of built in demodulators and decoders.

Thank you to reader Jon for writing in and noting that SDRangel has recently been released for Android as a free Google Play download. This is an amazing development that could open up many doors into portable decoding setups as the Android version supports almost every decoder implemented on the desktop version. Jon writes:

It includes most of the functionality of the desktop version of SDRangel, including:

  • AM, FM, SSB, Broadcast FM and DAB, AIS, ADS-B, Digital Voice (DMR, dPMR, D-Star, FreeDV), Video (DVB-S, DVB-S2, NTSC, PAL), VOR, LoRa, M17, Packet (AX.25), Pager (POCSAG), Radiosonde (RS41), Time signal (MSF, DCF77, TDF and WWVB) modems.
  • RTL SDR, Airspy, Airspy HF, LimeSDR, HackRF and SDRplay support via USB OTG as well as networked SDRs
  • 2D and 3D signal analysis in both time and frequency domain with statistical measurements of SNR, THD, THD+N, SINAD, SFDR and channel power
  • Satellite tracker, star tracker, maps and rotator controller

It should work on Android 6 and up. It’s a straight port of the desktop application, so although it will run on a phone, probably best used on a large tablet with a stylus or mouse.

SDRangel on Android
SDRangel on Android

A RS41 and DFM09 Radiosonde Decoder Plugin for SDR++

A new decoder for RS41 and DFM09 radiosondes has been released as a plugin for SDR++ by dbDexter.  A radiosonde is a sensor package with RF transmitter that is attached to a weather balloon. Meteorological agencies around the world typically launch two per day in order to gather weather forecast data. With an RTL-SDR, appropriate antenna and a decoder it is possible to receive this data, and plot the GPS location on a map.

Installing a plugin for SDR++ requires adding the build options to the SDR++ source, and building SDR++, so it could be a little difficult for Windows, but relatively simple build instructions for Linux are provided in the Readme.

A Radiosonde Decoder for SDR++

Over on Twitter FelixTRG (@OK9UWU) has tested the plugin out and has found it to work well.

RS41 RadioSonde Tracking Software

A radiosonde is a small weather sensor package that is typically attached to a weather balloon. As it rises into the atmosphere it measures parameters such as temperature, humidity, pressure, GPS location etc, and transmits this data back down to a receiver base station using a radio signal. The RS41 is one of the newer radiosonde modules sold by  radiosonde manufacturer Vaisala, and is currently one of the most popular radiosondes in use by meteorological agencies. The signal is typically found at around 400 MHz and can be received with an RTL-SDR and an antenna tuned for 400 MHz. We have a general tutorial on radiosonde decoding available here.

There are several software packages that can decode RS41 data, such as the multi-radiosonde decoder Windows program called SondeMonitor (25 euros), or the free Linux command line software called RS. Recently a new free Windows GUI based RS41 decoder has been released by IW1GIS. The software can display on Google maps the current location and previous path of the radiosonde, as well as it's weather data telemetry.

Main features are:

  • Directly decoding of GFSK signal received by the FM radio receiver (the use of a Software Defined Radio is recommended).
  • Capability to connect and command SDRSharp software by mean of Net Remote Control plugin.
  • Advanced frequencies scan and decode: RS41 Tracker is able to look for RS41 radiosonde signal in a given list of frequencies, starting the radiosonde decoding when a valid signal is detected.
  • Real time showing radiosonde position on google map (internet connection is required)
  • Map auto centered on radiosonde position
  • Map type selectable by user (road, satellite, hybrid, terrain).
  • Burst killer detailed information and launch time estimation.
  • Radiosonde RAW data save
  • Post processing of RS41 RAW data file
  • Tracking information (elevation, bearing, slant range)
  • Radiosonde track saved on kml file
  • Ghost track shown on map (loading from kml file)
  • Shortcut for google maps in browser
RS41 Tracker Software
RS41 Tracker Software